JVC AV-14148N, AV-14145N Setting up your TV, Connecting the aerial To install rod aerial

Setting up your TV

CAUTION

•Turn off the equipment including the TV before connecting.

1Connecting the aerial To install rod aerial

Install into the top-rear aerial holder. Once installed, it cannot be removed.

indoor aerial

VHF/UHF outdoor aerial

Rear￿￿￿￿￿￿￿of￿￿￿￿￿￿the TV

￿￿￿￿￿￿￿￿￿￿

Rod aerial

Aerial holder

￿￿￿￿￿￿￿	￿￿￿￿￿￿￿￿￿￿￿
	￿￿￿￿￿

If you connect a VCR, connect the aerial output jack of your VCR and the aerial jack on the TV with the aerial cable. Then connect the output jacks of your VCR and the VIDEO-1 input jacks of the TV with the video cable and audio cables. For details, see the manual of your VCR.

To audio/video output

VHF/UHF outdoor aerial

Rear￿￿￿￿￿￿￿of￿￿￿￿￿￿the TV

￿￿￿￿￿￿￿￿￿￿

To RF output

3 Inserting batteries into the remote control.

Insert two batteries by following the ª and

·polarities and inserting the · end first.

CAUTION:

Follow the cautions printed on the batteries.

Notes:

•Use AA/R6/UM-3 dry cell batteries.

•If the remote control does not work properly, fit new batteries. The supplied batteries are for testing, not regular use.

VCR To aerial input

The illustration shown is just a sample. It may not be same as your TV.

2 Connecting the compatible main plug to the AC outlet.

4 Turn on the TV by pressing the main power button.

JVC logo appears on the screen.

6