JVC AV-14FMT3, AV-21DMT3, AV-21LMT3 Press Menu Tto display Menu 1 menu, then select on Timer

OPERATE BY VOL-+

SELECT BY EXIT BY

PROGRAM BY -+ DISPLAY

2 Press MENU Mto select a channel you want to view when the TV turns on.

3 Press VOLUME Mto select the period of time after which you want to turn on the TV.

The ON TIMER function starts.

• Each time you press the button, the period of time changes in 15 minute intervals (up to 12 hours).

To cancel the ON TIMER function, press the VOLUME m button to set the period of time to “0:00”.

4 Press DISPLAY to turn the display off.

• If you turn off the TV’s main power by pressing the Main power button, the ON TIMER function is canceled.

• If you do not turn off the TV after starting the ON TIMER function, the channel will automatically switch to the channel set for the ON TIMER function.

Using the TV’s menus

ON TIMER

Your TV will automatically turn on and tune into the channel you set after the period of time you set.

1 Press MENU Tto display the

“MENU 1” menu, then select “ON TIMER”.

MENU	1	Channel
INPUT	TV
ON TIMER
PR 1	0:00	No.
VNR	OFF

When the time set for the ON TIMER function is reached:

The TV automatically turns on and the channel set for the ON TIMER function is displayed.

•For safety reasons the TV will automatically turn off if no operations are made within approximately two hours after the TV is turned on with the ON TIMER function.

•The OFF TIMER function and AUTO SHUTOFF function have priority over the ON TIMER function.

INPUT

You can view images from VCRs or other devices connected to your TV.

1Press MENU Tto display the “MENU 1” menu, then select “INPUT”.

MENU	1
INPUT	TV
ON TIMER
PR 1 0:00
VNR	OFF
SELECT BY	EXIT BY
OPERATE BY -+	DISPLAY

2Press MENU Mto select the VIDEO mode.

TV mode changes to VIDEO mode.

VNR (Video Noise Reduction)

You can reduce the picture noise.

1Press MENU Tto display the

“MENU 1” menu, then select “VNR”.

MENU	1
INPUT	TV
ON TIMER

PR 1 0:00

VNRON

SELECT BY	EXIT BY
OPERATE BY -+	DISPLAY

2Press MENU Mto select “ON”.

To cancel the VNR function, select “OFF”.

11