Initial Setup
Auto Tuner Setup
The auto tuner setup function is described on page 17 as the interactive
| Press the MENU button |
|
| � � � � � � � � � � � � � | |
|
| |
π† | To AUTO TUNER SETUP | � � � � � � � � � � � � � � |
| ||
√® | To operate | � � � � � � � � �� � � � � |
è | To choose CABLE or AIR |
|
†To move to START
√® | To start Auto Tuner Setup | � � � � � |
� � | ||
| � � � � � � � | � �� � � � � � � � � � |
Programming will take approximately 1 to 2 minutes. The
auto tuner is finished when the message PROGRAMMING OVER! appears onscreen.
Channel Summary
Channel summary allows you to customize the
Press the MENU button π† To CHANNEL SUMMARY
è To operate
The Channel summary screen will now be displayed with the channels set to scan marked with an “√”. You can delete channels from the scan by removing the “√”. If any channels were missed during auto tuner setup and you wish to add them, you may by placing an “√” next to the channel number.
π† To the SCAN column
√® To include or delete from scan π† To the ID column
è To add channel label è To insert letter
†To next letter
†To move to FINISH when label is complete
è To memorize the label
Press the EXIT button when finished
� � � � � � � � � � � � �
� � � � � � � � � � � � � �
�� ��� ���� �� | � �� �� ���� �� | |
� | � | � |
� | � | � |
� | � | � |
� | � | � |
� | � | � � |
� � � � � � � �
� � � � � � � � � � � � � � � � � � �
� � � � � � � � � � � � �
� � � � � � � � � � � � � � � � �
� � � � � � � � �
| � � � � � � |
� � � � � � � � | � � � � � � � � |
� � � � � � � � � | � � � � � � � � � � |
You can block access to a channel by activating the channel lock.
Press the MENU button
π† To CHANNEL SUMMARY
è To operate
π† To the Lock Column ( )
Press the ZERO button to lock or unlock that channel
Press the EXIT button when finished
24