English
5.Place all available channels in memory. By pressing menu button five times, you will see the preset set up. By selecting Auto Program it will set up all available channels into memory. If you want to add or delete channels from memory, you can do it by going into add/delete mode. (refer to preset setup menu on p.29)
6.Set the Time. To set the time go to clock set up and set as previously explained. (refer to clock setup menu on p.28)
Cable/Antenna Connections
•In order to get clear reception you must connect antenna or cable to your television set.
Cable Connection:
•Connect your local company’s cable to ANT on back of your television.
•Select the cable mode in SET UP menu. (refer to preset menu)
Incoming Cable
From Cable Company
ANT
Note: You may need a converter box in order to get a proper reception and for special cable channels broadcasting. You must check with your local cable company for compatibility requirements.
75 Ohm VHF/UHF
on back of TV
Antenna Connection:
•You will need an external antenna for proper reception of VHF/UHF channels. An outdoor antenna is recommended for best reception.
•Connect your home antenna to ANT connection on back of television.
•Select Air mode in the set up menu. (refer to preset menu)
Note: The cable mode is preset from the factory. If you are using an antenna then you must change to Air mode in the Set Up menu.
(refer to preset setup menu on p.29)
Incoming Cable
From Home Antenna
ANT
7