Preparation for USE, Operations | FUNAI DWT1304 specs

To cancel the sleep timer: Press the SLEEP button repeatedly until "SLEEP 0" is displayed.

SLEEP 10

PREPARATION FOR USE

LANGUAGE SELECTION

If you want to change the language of the on-screen menu, follow the procedure below.

1)Connect the power cord to a standard AC outlet.

2)Press the POWER button to turn on the TV.

		PICTURE
3)	Press the MENU button so that the menu display appears on the TV	CHANNEL SET
3)		[ENG] / ESP / FRA
	screen.	[ENG] / ESP / FRA
	screen.	V-CHIP SET UP
		CAPTION [OFF]
4)	Press the CH(annel) ▲ or ▼ button to point to "[ENG]".

●The TV distinguishes between standard TV channels and cable channels.

●When AUTO PRESET CH action is completed, the lowest memorized channel reappears on the screen.

●When you press the CH(annel) ▲ or ▼ button after selecting "AUTO PRESET CH", the tuner will stop at the memorized channels only.

●The TV may recognize TV channels to be CATV channels by the receiving conditions. In this case, try AUTO PRESET CH action again in the fine receiving conditions.

●When AUTO PRESET CH is activated where there is no TV signal input,"NO TV SIGNALS" will appear on the display after the completion of channel scanning.

5)	Select "ENG(lish)", "ESP(añol)" or "FRA(nçais)" by using	PICTURE
	the VOL(ume) ▲ or ▼ button.	CHANNEL SET
	the VOL(ume) ▲ or ▼ button.	[ENG] / ESP / FRA
		[ENG] / ESP / FRA
		V-CHIP SET UP
6)	Press the MENU button to exit the menu.	CAPTION [OFF]

CHANNEL PRESETTING

[ADD/DELETE FUNCTION]

1)Press the MENU button so that the menu display appears on the TV screen.

2)Press the CH(annel) ▲ or ▼ button to point to "CHANNEL SET". Then, press the VOL(ume) ▲ button.

3)Press the VOL(ume) ▲ button so that "ADD/DELETE" is selected.

4)Use the CH(annel) ▲ or ▼ button to select the

channel you wish to put into memory or to erase from memory.

PICTURE CHANNEL SET [ENG] / ESP / FRA V-CHIP SET UP CAPTION [OFF]

To preset a channel or to change a preset channel, follow the procedure below.

1)	Press the POWER button to turn on the TV.
2)	Press the MENU button so that the menu display appears
	on the TV screen.

PICTURE CHANNEL SET [ENG] / ESP / FRA V-CHIP SET UP CAPTION [OFF]

Note: The menu will disappear in about 10 seconds.

Perform "ADD/DELETE" function while this display appears on the screen.

●Press the VOL(ume) ▲ or ▼ button to light up the channel number in LIGHT BLUE if you wish to add the channel into memory.

●Press the VOL(ume) ▲ or ▼ button to light up the channel number in LIGHT RED if you wish to erase the channel from memory.

ADD/DELETE AUTO PRESET CH

3)	Press the CH(annel) ▲ or ▼ button to point to "CHANNEL SET".
	Then, press the VOL(ume) ▲ button.
4)	Press the CH(annel) ▲ or ▼ button to point to "AUTO PRESET CH".
	Then, press the VOL(ume) ▲ button.
	The tuner scans and memorizes all active channels in your area.

PICTURE CHANNEL SET [ENG] / ESP / FRA V-CHIP SET UP CAPTION [OFF]

ADD/DELETE AUTO PRESET CH

5) Press the MENU button to exit the menu.

RESUME FUNCTION

If the power fails or is disconnected while the TV is powered on, the TV will turn on automatical- ly when the power resumes.

OPERATIONS

WATCHING A TV PROGRAM

PICTURE ADJUSTMENT

1)Press the POWER button to turn on the TV.

2)Select the desired channel with the CH(annel) ▲ or ▼ button.

3)Adjust the volume to the desired listening level using the VOL(ume) ▲ or ▼ button.

4)Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT".)

1)Press the MENU button so that the menu display appears on the TV screen.

2)Press the VOL(ume) ▲ button so that "PICTURE" is selected.

3)Select the feature you wish to adjust with the CH(annel) ▲ or ▼ button and adjust it with the VOL(ume) ▲ or ▼ button.

SETTING THE SLEEP TIMER

The sleep timer function enables you to shut off the power without pressing the POWER button after a desired time period.

1)Press the POWER button to turn on the TV and press the SLEEP button on the remote control .

2) You may change the sleep time by pressing the SLEEP button on the remote control repeatedly. The timer can be set up to 90 min-

utes. 10 minutes are added, each time the SLEEP button is pressed. (The timer display counts up and sleep timer will be displayed on the screen when you press the SLEEP button on the remote control.)

Note: When you disconnect the unit from the AC outlet, or when you have a power failure, the sleep time will be lost.

CLOSED CAPTION SELECTION

You may view specially labeled (cc) TV pro-			1) Press the MENU button so that the menu
grams, movies, news, prerecorded tapes, etc.				display appears on the TV screen.
with either a dialogue caption or text display			2) Press the CH(annel) ▲ or ▼ button to point
added to the program.				to "CAPTION".
			3) Press the VOL(ume) ▲ or ▼ button to
				select the mode you wish.
			4) When done, press the MENU button to exit
: Press the VOL(ume) ▲ or ▼ button.				the menu.
PICTURE	PICTURE	PICTURE			PICTURE	PICTURE
CHANNEL SET	CHANNEL SET	CHANNEL SET			CHANNEL SET	CHANNEL SET
[ENG] / ESP / FRA	[ENG] / ESP / FRA	[ENG] / ESP / FRA			[ENG] / ESP / FRA	[ENG] / ESP / FRA
V-CHIP SET UP	V-CHIP SET UP	V-CHIP SET UP			V-CHIP SET UP	V-CHIP SET UP
CAPTION [OFF]	CAPTION [ C1]	CAPTION [ C2]			CAPTION [ T1]	CAPTION [ T2]

GAME MODE

Set to the most suitable position for video games.

[+]: ON

[ - ] : OFF

BRIGHT

Adjust until the whitest parts of the picture are as bright as you prefer.

[+]: increase brightness [ - ] : decrease brightness

CONTRAST

Adjust to increase or decrease contrast.

[+]: increase contrast [ - ] : decrease contrast

COLOR

Adjust to be brilliant or pale color.

[+]: be brilliant color [ - ] : be pale color

TINT

Adjust to obtain natural skin tones.

[+]: greenish tone [ - ] : reddish tone

Notes:

●"+" is achieved by pressing the VOL(ume) ▲ button and "-" by pressing the VOL(ume) ▼ button.

●In the above steps, the picture adjustment display will disappear from the TV screen after about 10 seconds unless you press any buttons, even though you may not be fin- ished. Press the MENU and VOL(ume) ▲ button so that "PICTURE" is selected. Then, press the CH(annel) ▲ or ▼ button repeat- edly until the display returns to the screen.

●If you adjust another Picture control after you set the Game mode to [ON], the Game mode is set to [OFF] automatically.

[USING THE GAME BUTTON]

You may also set the Game mode and external input mode at the same time by pressing the GAME button on the remote control. “GAME” appears on the TV screen.

●To exit the Game mode and external input mode, press the GAME button on the remote control again.

●To cancel the Game mode only, adjust the picture control. The Game mode will be set to [OFF] automatically as explained in the pre- vious section. In this case, “VIDEO”(external input mode) instead of “GAME” appears on the TV screen.

●When you press the GAME button if the TV is off, the TV turns on and will be in the Game mode and external input mode automatically.

: Press the CH(annel) ▲ or ▼ button.

[-]

GAME MODE [+]

[-]

BRIGHT

[+]

[-]CONTRAST [+]

[-]

COLOR

[+]

[-]

TINT

[+]

OFF

DWT1304 specifications

The FUNAI DWT1304 is a versatile and innovative digital television tuner known for its ability to enhance the viewing experience. Designed for users who desire an effortless transition to digital broadcasting, the DWT1304 combines convenience, functionality, and advanced technology into a compact unit.

One of the standout features of the FUNAI DWT1304 is its capability to receive over-the-air digital signals. This enables users to access a variety of channels without the need for a cable subscription, making it a cost-effective solution for television enthusiasts. It supports ATSC, the Advanced Television Systems Committee standard, ensuring compatibility with high-definition programming.

The DWT1304 is equipped with a built-in digital video recorder (DVR) functionality, allowing users to record their favorite shows and movies directly onto a USB storage device. This feature adds convenience for those who may have busy schedules, allowing them to watch their preferred content at a later time. The user-friendly interface makes navigating recorded content easy, providing seamless access to previously aired programs.

Another impressive aspect of the FUNAI DWT1304 is its excellent signal processing technology, which offers enhanced picture and sound quality. This ensures that viewers can enjoy crisp images and clear audio, significantly improving the overall viewing experience. Its support for high-definition output allows users to enjoy content in stunning 720p and 1080p resolutions.

The device also features an intuitive on-screen guide that helps users navigate available channels and programming. This electronic program guide (EPG) not only displays current shows but also provides information on upcoming broadcasts, making it easier for viewers to plan their viewing schedules.

In terms of connectivity, the FUNAI DWT1304 includes HDMI output for a straightforward, high-quality connection to modern televisions. Additionally, it has composite video and audio outputs to ensure compatibility with older TVs. Its compact design means it can easily fit into any entertainment setup without taking up excessive space.

Overall, the FUNAI DWT1304 is an excellent choice for anyone looking to enhance their television experience. With its digital tuner, recording capabilities, superior signal processing, clear user interface, and versatile connectivity options, it stands out as a practical and powerful addition to a home entertainment system.