SPECIAL SETTINGS ______________________________
Fine tuning television channels
Installation |
|
Program no | 1 |
System | B/G |
Channel | 6 |
Band | C |
Search |
|
Fine tuning |
|
Store |
|
Select | Back |
and edit | Exit |
The television automatically tunes itself to the best possible recepti- on. You may need to carry out manual fine tuning in areas where there is poor reception.
1Press »i« to open the »MAIN MENU«.
–The »MAIN MENU« appears.
2Select »Setup« with »P+« or
–The »Setup« menu appears.
3Select »Installation« with »P+« or
4Select »Fine tuning« with »P+« or
5Select »Store« with »P+« or
–The »Stored« message appears.
6Press »i« to finish the setting.
Setup
ATS
Installation
Program table
Select | Back |
OK | Exit |
● and open | |
Installation |
|
Program no | 1 |
System | B/G |
Channel | 6 |
Band | C |
Search |
|
Fine tuning |
|
Store |
|
Select | Back |
and edit | Exit |
Setting the television channels by entering the channel numbers
1 | Press »i« to open the »MAIN MENU«. |
| – The »MAIN MENU« appears. |
2 | Select »Setup« with »P+« or |
| – The »Setup« menu appears. |
3 | Select »Installation« with »P+« or |
| »OK«. |
4 | Select »Program no« with »P+« or |
| channel with »« or »«. |
5 | Select »Channel« with »P+« or |
6 | Press »« or »« to switch up and down channels or use |
| »1…0« to enter the channel number directly. |
7 | Select »Band« with »P+« or |
8 | Press »« or »« to choose between »S« (special channel) |
| and »C« (channel). |
| Note: |
Installation
Program no
System
Channel
Band
Search
Fine tuning
Store
| Select |
OK | and edit |
● |
1
B/G
6 C
Back
Exit
The current system is automatically displayed in the »System« |
line. Select »System« with »P+« or |
are incorrect. Select the setting required with »« or »«. |
9 Select »Store« with »P+« or |
– The »Stored« message appears. |
Note:
To set the other television stations, repeat steps 3 to 9.
10Press »i« to finish the setting.
26