
SETTINGS ______________________________________________
Picture settings
Picture
Brightness 39
Contrast
Colour
Sharpness
Hue
Noise reduction | Sharp | |
Picture smart | User | |
To Page 2 |
| |
| Select | Back |
OK | and edit | Exit |
● |
1Press »i« to open the »MAIN MENU«.
–The »MAIN MENU« appears.
2Select »Picture« with »P+« or
–The »Picture« menu appears.
3Select »Default settings« with »P+« or
4Select »Brightness«, »Contrast«, »Colour«, »Sharpness« or »Noise reduction« with »P+« or
Note:
The setting »Hue« only applies to NTSC programmes (e.g. for playback of American television programmes on the video recorder).
5Press »« or »« to select the level, and then press »OK« to confirm.
6Press »i« to finish the settings.
Audio settings
Sound
Volume | 0 |
Balance |
|
Sound type | Stereo |
Effect | Normal |
AVL | On |
Equalizer |
|
Headphones |
|
Select | Back |
and edit | Exit |
1Press »i« to open the »MAIN MENU«.
–The »MAIN MENU« appears.
2Select »Sound« with »P+« or
–The »Sound« menu appears.
Volume
1Select »Volume« with »P+« or
Balance
1Select »Balance« with »P+« or
Stereo / two channel, mono
If the device receives two channel programmes, e.g. a film with the original sound on sound channel B (display: »Dual B «) and the dubbed version on sound channel A (display: »Dual A«), you can select the sound channel you desire.
If the device receives stereo or Nicam programmes, it switches automatically to stereo sound (display: »Stereo«).
You can switch the sound to »Mono« if the stereo reception quality is poor.
1Select »Sound type« with »P+« or
12