FUNAI DCT3203 owner manual Preparation for USE, Operations

Page 3
SLEEP 10
To cancel the sleep timer:
Press the SLEEP button repeated- ly until "SLEEP 0" is displayed.
PICTURE CHANNEL SET [ENGLISH]FRANÇAIS V-CHIP SET UP CAPTION [OFF]
TV SOUND [MAIN]
ADD/DELETE
AUTO MEMO

PREPARATION FOR USE

LANGUAGE SELECTION

If you want to change the language of the on-screen menu, follow the proce- dure below.

1)

Connect the power cord to a standard AC outlet.

Note: If some digits appear in the corner of the screen,

press the POWER button without unplugging the power cord.

2)

Press the POWER button to turn on the TV.

3)

Press the MENU button so that the menu display appears

 

on the TV screen.

PICTURE CHANNEL SET [ENGLISH]FRANÇAIS V-CHIP SET UP CAPTION [OFF]

TV SOUND [MAIN]

PICTURE

CHANNEL SET

3)Press the VOL(ume) button so that "ADD/DELETE" is selected.

4)Use the CH(annel) or button to select the channel you wish to put

into memory or to erase from memory.

Note: The display will return to the normal screen automatically in about 10 seconds.

Perform "ADD/DELETE" function while this display appears on the screen.

Press the VOL(ume) or button to light up the channel number in LIGHT BLUE if you wish to add the channel into memory.

Press the VOL(ume) or button to light up the channel number

in LIGHT RED if you wish to erase the channel from memory.

5) Press the MENU button to exit the menu.

ADD/DELETE AUTO MEMO

4)

Press the CH(annel) or button to point to "[ENGLISH]".

5)

Select "ENGLISH" or "FRANÇAIS" = French by using

 

the VOL(ume) or button.

6)

Press the MENU button to exit the menu.

[ENGLISH]FRANÇAIS V-CHIP SET UP CAPTION [OFF]

TV SOUND [MAIN]

MTS (Multi-Channel Television Sound) System

You can listen to a program in MTS stereo by following the steps below.

CHANNEL PRESETTING

NOTE:You MUST PRESET channels BEFORE using CHANNEL or button. To preset a channel or to change a preset channel, follow the procedure below.

1) Press the POWER button to turn on the TV.

2) Press the MENU button so that the menu display appears on the TV screen.

3) Press the CH(annel) or button to point to "CHANNEL SET". Then, press the VOL(ume) button.

4) Press the CH(annel) or button to point to "AUTO MEMO". Then, press the VOL(ume) button.

The tuner scans and memorizes all active channels in your area.

The TV distinguishes between standard TV channels and cable (CATV) channels.

When AUTO MEMO action is completed, the lowest memorized channel reappears on the screen.

When you press the CH(annel) or button after selecting AUTO MEMO, the tuner will stop at the memorized channels only.

The TV may memorize TV channels as CATV channels if the reception conditions are poor. If this happens, try the AUTO MEMO action again when reception conditions are better.

[ADD/DELETE FUNCTION]

PICTURE

1) Press the MENU button so that the menu display appears on the TV

CHANNEL SET

screen.

[ENGLISH]FRANÇAIS

V-CHIP SET UP

2) Press the CH(annel) or button to point to "CHANNEL SET".

CAPTION [OFF]

TV SOUND [MAIN]

Then, press the VOL(ume) button.

 

 

Menu

 

 

 

 

 

To show the status, press the

 

 

 

 

 

 

Selection

MAIN

MONO

SAP

 

 

DISPLAY button on the remote

 

Type of

 

 

 

broadcast

 

 

 

 

 

control.

 

Regular

-None-

-None-

-None-

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Stereo

STEREO

MONO

STEREO

 

 

SAP: Second Audio Program,

 

broadcast

 

 

which means your program, can

 

 

 

 

 

 

 

SAP

MAIN

MAIN

SAP

 

 

also be received in a second lan-

 

 

 

guage or sometimes a radio station.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[To Select STEREO, MONO or SAP in Stereo broadcast]

1)Press the MENU button so that the menu display appears on the TV screen.

2)Press the CH(annel) or button to point to "TV SOUND".

3)Press the VOL(ume) or button to select your desired stereo mode. ([MAIN], [MONO] or [SAP].)

: Press the VOL(ume) or button.

Menu

 

PICTURE

 

PICTURE

PICTURE

 

 

Selection

MAIN

CHANNELMONOSET

SAP

 

CHANNEL SET

CHANNEL SET

Type of

 

 

 

 

[ENGLISH]FRANÇAIS

[ENGLISH]FRANÇAIS

[ENGLISH]FRANÇAIS

broadcast

 

 

 

 

V-CHIP SET UP

-None-

V-CHIP SET UP

-None-

V-CHIP SET UP

Regular

-None-

CAPTION [OFF]

CAPTION [OFF]

 

CAPTION [OFF]

 

TV SOUND [MAIN]

 

TV SOUND [MONO]

 

TV SOUND [SAP]

Stereo

STEREO

MONO

STEREO

 

broadcast

 

 

 

 

 

SAP

 

 

 

 

 

 

 

 

 

RESUME FUNCTION

If the power fails or is disconnected while the TV is powered on, the TV will turn on automatical- ly when the power resumes.

OPERATIONS

WATCHING A TV PROGRAM

1)Press the POWER button to turn on the TV.

2)Select the desired channel with the CH(annel) or button.

3)Adjust the volume to the desired listening level using the VOL(ume) or button.

4)Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT".)

Note:

See “Picture adjustment” to manually customize the picture. : Press the CH(annel) or button.

MANUAL

SPORT

NEWS

MOVIE

GAME

SETTING THE SLEEP TIMER

The sleep timer function allows you to have the POWER automatically turn off after a set time period.

1)Press the POWER button to turn on the TV and press the SLEEP button on the remote control .

2) You may change the sleep time by pressing the SLEEP button on the remote control repeatedly. The timer can be set up to 90 minutes, 10 minutes each time the SLEEP button is pushed. (The timer display counts up and sleep timer will be displayed on the screen when you press the SLEEP button on remote control.)

Note: When you disconnect the unit from the AC outlet, or if you have a power failure, the sleep time will be lost.

CLOSED CAPTION SELECTION

You may view specially labeled (cc) TV pro-

1) Press the MENU button so that the menu

grams, movies, news, prerecorded tapes, etc.

display appears on the TV screen.

with either a dialogue caption or text display

2) Press the CH(annel) or button to point

added to the program.

to "CAPTION".

PICTURE ADJUSTMENT

1)Press the MENU button so that the menu display appears on the TV screen.

2)Press the VOL(ume) button so that "PIC- TURE" is selected.

3)Press the CH(annel) or button to select “MANUAL”. Then, press the VOL(ume) button.

4)Select the feature you wish to adjust with the CH(annel) or button and adjust it with the VOL(ume) or button.

: Press the CH(annel) or button.

 

VOL(ume)

VOL(ume)

 

 

 

BRIGHT

to decrease

to increase

 

brightness

brightness

CONTRAST

to decrease

to increase

 

contrast

contrast

COLOR

to pale

to brilliant

 

 

 

TINT

to purple

to green

 

 

 

SHARPNESS

to soft

to clear

 

 

 

 

 

 

3) Press the VOL(ume) or button to select

 

 

 

the mode you wish.

 

 

 

 

4) When done, press the MENU button to exit

: Press the VOL(ume) or button.

 

 

the menu.

 

 

 

 

 

PICTURE

PICTURE

 

 

PICTURE

PICTURE

PICTURE

CHANNEL SET

CHANNEL SET

CHANNEL SET

CHANNEL SET

CHANNEL SET

[ENGLISH]FRANÇAIS

[ENGLISH]FRANÇAIS

[ENGLISH]FRANÇAIS

[ENGLISH]FRANÇAIS

[ENGLISH]FRANÇAIS

V-CHIP SET UP

V-CHIP SET UP

V-CHIP SET UP

V-CHIP SET UP

V-CHIP SET UP

CAPTION [OFF]

CAPTION [ C1]

CAPTION [ C2]

CAPTION [ T1]

CAPTION [ T2]

TV SOUND [MAIN]

TV SOUND [MAIN]

TV SOUND [MAIN]

TV SOUND [MAIN]

TV SOUND [MAIN]

AV MEMORY

This feature allows you to expand your viewing experience select MANUAL, SPORT, NEWS, MOVIE, and GAME to match the program you are watching.

1)Press the MENU button so that the menu display appears on the TV screen.

2)Press the VOL(ume) button so that "PICTURE" is selected.

3)Select the item with the CH(annel) or button.

[-]

BRIGHT

[+]

[-]CONTRAST [+]

[-]

COLOR

[+]

[-]

TINT

[+]

[-]SHARPNESS [+]

Note:

In the above steps, the picture adjustment display will disappear from the TV screen automati-

cally after about 10 seconds if you do not press any buttons. Press the MENU and VOL(ume) button so that "PICTURE" is selected. Then, press the CH(annel) or button repeatedly until the display returns to the screen.

[USING THE GAME BUTTON]

You can set the Game mode and front AUDIO/VIDEO input mode at the same time by pressing the GAME button on the remote control. “GAME” appears on the TV screen.

To exit the Game mode and external input mode, press the INPUT SELECT button on the remote control.

To cancel the Game mode only, adjust the AV MEMORY. In this case, “VIDEO2” instead of “GAME” appears on the TV screen.

If you press the GAME button when the TV is off, the TV turns on and will be in the Game mode and external input mode automatically.

Image 3
Contents Closed Caption FeaturesPrecautions ANTENNA/CABLE ConnectionsRisk of Electric Shock Installing the BatteriesOperations Preparation for USESpecifications Troubleshooting GuideMaintenance Supplied Accessories