Zap function

›Z 7 PRO7

TELEVISION OPERATION___________________

With this function you may store the current channel position and switch to another one (zap).

1Use »1…0« or »P+«, »P--« to select the channel position you wish to store in the zap memory (e.g channel position 7, PRO7) then press »Z« to store it.

– On the picture screen appears, for example, »Z 7 PRO7«.

2Using »1…0« or »P+«, »P-« you now may switch to another channel position.

3By pressing »Z« you may switch at any time to the stored chan- nel position (PRO7 in the example) and switch back (zap) to the last viewed channel.

4Press »i« to end the zap function.

– The on-screen display disappears.

Alphanumeric channel selection

You may select the channel positions directly by entering the chan- nel name (e.g. ARD). For this, letters are assigned to the numeric buttons »2…0«. Up to four letters can be assigned.

1 Use »2…0« to enter the first letter of the channel name (e.g. »2« for the letter A).

– A list of all TV channels beginning with the letters »A«, »B«, or »C« appears on the picture screen.

– Every entry of a further letter confines the list of channel

	names.
	2 Use »P+«, »P-« to select the desired channel in the list then
	press »OK« to call it up.
	Note:
	Three methods are possible for selecting a channel position:
	1. Letter entry off: The channels are only selected by entering
	digits.
	2. Letter entry on: The channels are only selected by entering
	alphanumeric characters.
	3. Mix: When entering a digit, the TV set switches automatical-
	ly to the corresponding channel position and the channel list
	for assigning letters is displayed.
	The channel selection mode is selected in the »Installation«
	menu under the »Special functions« menu item. See also the	ENGLISH
	notes in the Easy-Dialog system.	ENGLISH
	notes in the Easy-Dialog system.