VIDEO IN
L
AUDIO IN
R
Headphone
Volume |
|
Balance |
|
Bass |
|
Treble |
|
Sound Type | Stereo |
●F Back
●i Exit
26
USING EXTERNAL DEVICES _______________
Note:
Do not connect any other equipment while the device is switched on. Switch off the other equipment as well before connecting it.
Only plug the device into the mains socket after you have connected the external devices and the antenna.
Decoder or satellite receiver
In order for the television to receive encoded programs from a privately operated station, a decoder is needed.
Connecting a decoder or satellite receiver
Decoder | L | AV 3 |
AUDIO |
| |
OUT |
| |
R |
| |
| AV 1 | AV 2 |
PAY |
|
|
1Connect the »AV1« socket on the television set and the appro- priate socket on the decoder using a
Notes:
A satellite receiver can also be connected to this socket.
If you want to use both a satellite receiver and a decoder, the decoder must be connected to the satellite receiver.
Using a decoder
1Switch on the television and the decoder.
2Select the »AV1« preset channel by pressing »AV« repeatedly until »AV1« appears on the screen.
Headphones
Connecting headphones
1Insert the headphone jack (3.5 mm ø jack plug) in the head- phone socket on the television.
Selecting the sound settings for the headphones
1Press »i« to open the »MAIN MENU«.
2Select »Sound« with »P+« or
3Select »Headphone« with »P+« or
4Select »Volume«, »Balance«, »Bass«, »Treble« or »Sound Type« with »P+« or
5Press »i« to finish the setting.