SETTINGS ______________________________________________
Picture settings
1Press »i« to open the »MAIN MENU«.
– The »MAIN MENU« appears.
Picture
Brightness |
|
Contrast |
|
Colour |
|
Sharpness |
|
Noise reduction | Off |
Reference Plus | On |
| F |
| ● Back |
| ●i Exit |
Picture
Brightness |
|
Contrast |
|
Colour |
|
Sharpness |
|
Noise reduction | Off |
Reference Plus | On |
| F |
| ● Back |
| ●i Exit |
Picture
Brightness |
|
Contrast |
|
Colour |
|
Sharpness |
|
Noise reduction | Off |
Reference Plus | On |
| F |
| ● Back |
Ref. Plus Demo ●i Exit
2Select »Picture« with »P+« or
– The »Picture« menu appears.
Note:
Further operation is explained in the following sections.
Picture settings
1Select »Brightness«, »Contrast«, »Colour« or »Sharpness« with »P+« or
Note:
After a short while the »Picture« menu reappears.
The settings are saved as the »User« picture default setting.
Setting the picture features
You can set the noise suppression of the picture.
You can set the noise suppression to one of four settings: »Low«, »Medium«, »High« and »Off«.
1Select »Noise Reduction« with »P+« or
Reference Plus
The Reference Plus technology combines high resolution and natural movements. Intelligent signal processing is used to prevent distor- tions.
1Select »Reference Plus« with »P+« or
Note:
By pressing »OK« you can switch the »Reference Plus Demo« function on or off.
The left half of the screen shows the programme with the »Reference Plus« function switched on, on the right side the function is switched off.
Concluding the settings
1Press »i« to finish the settings.
10