JVC HD-52Z575 Memory IC Replacement 3.2.1 Memory IC, Service Menu Setting Items, Adjust

3.2 MEMORY IC REPLACEMENT 3.2.1 MEMORY IC

This memory IC stores data for proper operation of the video and Drive circuits.

When replacing, be sure to use an IC containing this (initial value) data.

3.2.2MEMORY IC REPLACEMENT PROCEDURE 1. Power off

Switch off the power and disconnect the power cord from the wall outlet.

2. Replace the memory IC

Initial value must be entered into the new IC.

3. Power on

Connect the power cord to the wall outlet and switch on the power.

4. SERVICE MENU setting

Before entering the SERVICE MENU, confirm that the setting

of TV/CATV SW of the REMOTE CONTROL UNIT is at the

"TV" side and the setting of VCR/DVD SW of the REMOTE

CONTROL UNIT is at the "VCR" side. If the switches have not

been properly set, you cannot enter the SERVICE MENU.

1) Press [SLEEP TIMER] key and while the indication of

SLEEP TIMER 0 MIN is being displayed, press

[DISPLAY] key and [VIDEO STATUS] key (Fig.2)

simultaneously.

2) The SERVICE MENU screen of Fig.1 is displayed.

3) Verify what to set in the SERVICE MENU, and set

whatever is necessary (Fig.1).

Refer to the SERVICE ADJUSTMENT for setting.

4) Press the [BACK] key to return the SERVICE MENU.

5. Receive channel setting

Refer to the OPERATING INSTRUCTIONS (USER'S

GUIDE) and set the receive channels (Channels Preset) as

described.

6. User settings

Check the user setting items according to after page.

Where these do not agree, refer to the OPERATING

INSTRUCTIONS (USER'S GUIDE) and set the items as

SERVICE MENU SCREEN

SERVICE MENU

1.ADJUST

2.SELF-CHECK

3.I2C STOP

Fig.1

3.2.3 SERVICE MENU SETTING ITEMS

Setting item	Item No.	Remark
1.ADJUST
VIDEO SYSTEM	S001~S039	Adjust
AUDIO SYSTEM	T001~T010
PANEL CONTROL SYSTEM	P001~P010	Do not adjust
DRIVE SYSTEM	D001~D187
		(Fixed value)
SYSTEM SETTING	Z001~Z010

described.

TV / CATV	TV CATV	VCR DVD	ASPECT	POWER
		MULTI SCREEN
(Set toTV)	TWIN		INDEX
	FREEZE	SWAP	SELECT
	INPUT 1	1	2	3
	V1
Number key	INPUT 2	4	5	6
	V2
	INPUT 3	7	8	9
	V3
	INPUT 4		0	RETURN+
	V4	TUNE		TV
	DIGITAL-IN	THEATER		VIDEO
		PRO		STATUS
SLEEP TIMER	D-IN
	SLEEP TIMER	+	SOUND	LIGHT
		DISPLAY
(Skip / Enter the SERVICE MENU)
MUTING (Memory key)	MUTING	CH		C.C.
				C.C.

VOL OK VOL

FUNCTION		CH
(Value setting key)	MENU		BACK
MENU	VCR CHANNEL	VCR / DVD	TV / VCR
	PREV NEXT	POWER
(Come out SERVICE MENU key )	REW	PLAY	FF

POWER

VCR/DVD

(Set to VCR)

SERVICE MENU ITEM SELECT KEY

1 3 & 9

VIDEO STATUS

DISPLAY

(Enter the SERVICE MENU)

FUNCTION

(SERVICE ITEM select key)

BACK

(Return key)

REC	STOP	PAUSE
OPEN CLOSE		STILL PAUSE
	RM-C15G

Fig.2

1-20 (No.YA092B)