JVC PD-42B50BU, PD-35B50BU, PD-42B50BJ, PD-35B50BJ manual Zoom function, Choose the Zoom mode

Page 20

Remote control buttons and functions

ZOOM function

You can change the screen size according to the picture aspect ratio. Choose the optimum one from the following ZOOM modes.

•The ZOOM mode is fixed at FULL when you are using the TV as a PC screen.

AUTO:

When a WSS (Wide Screen Signalling) signal, which shows the aspect ratio of the picture, is included in the broadcast signal or the signal from an external device, the TV automatically changes the ZOOM mode to 16:9 ZOOM mode or FULL mode according to the WSS signal.

If a WSS signal is not included, the picture is displayed according to the ZOOM mode set with the 4:3 AUTO ASPECT function.

•For details of the 4:3 AUTO ASPECT function, see “4:3 AUTO ASPECT” on page 32.

•When the AUTO (WSS) mode does not function correctly due to poor WSS signal quality or when you want to change the ZOOM mode, press the cbutton and change to another ZOOM mode.

REGULAR:

Use to view a normal picture (4:3 aspect ratio) as this is its original shape.

PANORAMIC:

This stretches the left and right sides of a normal picture (4:3 aspect ratio) to fill the screen, without making the picture appear unnatural.

•The top and bottom of the picture are slightly cut off.

14:9 ZOOM:

This zooms up the wide picture (14:9 aspect ratio) to the upper and lower limits of the screen.

16:9 ZOOM:

This zooms up the wide picture (16:9 aspect ratio) to the full screen.

16:9 ZOOM SUBTITLE:

This zooms up the wide picture (16:9 aspect ratio) with subtitles to the full screen.

FULL:

This uniformly stretches the left and right sides of a normal picture (4:3 aspect ratio) to fill the wide TV screen.

•For 16:9 aspect ratio pictures that have been squeezed into a normal picture (4:3 aspect ratio), use the FULL mode to restore the picture to its original shape.

Choose the ZOOM mode

1Press the c button to display the ZOOM menu

ZOOM

AUTO

REGULAR

PANORAMIC

14:9 ZOOM

16:9 ZOOM

16:9 ZOOM SUBTITLE FULL

OK

D0009-EN

2Press the 6 buttons to choose a

ZOOM mode. Then press the a button

The picture expands and the chosen ZOOM mode is displayed in about 5 seconds.

•The ZOOM mode may be automatically changed by the control signal from an external device. When you want to return to the previous ZOOM mode, choose the ZOOM mode again.

18

Image 20

Contents PD-42B50BU PD-35B50BU PD-42B50BJ PD-35B50BJ How to replace the fuse „ Warning„ If in doubt consult a competent electrician „ Guidelines for safe operationDistance recommendations „ Do not view for long periods of time in the Regular mode Burn-inAvoid burn-in as follows If Burn-in has occurredPicture Management demonstration Pixel defectsEffect on infrared devices Contents Checking the contents of packages „ Only use JVC approved accessories with your model Setting up your TVInstallation Connecting the aerial and video cassette recorder VCR Decoder EXT-2 onConnecting the power cord to the AC outlet Putting the batteries into the remote control„ Rear Panel Attaching the ferrite coresPress the Abutton on the TV Initial settingsPress the a button If you do not have a T-V Link compatible VCR connected Press the blue button to start the Auto Program functionPress the a button to display the T-V Link menu If ACI Error is displayed in the Auto Program menu „ ACI function„ Downloading the data to VCR If ACI START/ACI Skip appears in the Auto Program menuWhen Feature not Available is displayed Link functions„ Pre-set download Turn on the VCR Press the a button„ Direct Rec Turn the TV on from standby mode Adjust the volumeUsing the Menu TV buttons and functions Press the # standby button to turn TV on or off Remote control buttons and functions Turn the TV on or off from Standby mode To use the programme number PR 0 AV Choose a TV channel and watch images from external devicesTo return to a TV channel Press the r q buttons to adjust the volume Information functionChannel number display Time display„ Choose the Zoom mode Zoom functionUsing the Freeze function „ Adjusting the visible area of the picture3D Sound function Return to TV channel instantlyPictures multi Using the MULTI-PICTURE functionPress the Xbutton To return the multi-picture to one screen „ Setting the picture effect Favourite channel function„ Favourite channel registration „ Recalling the favourite channelSet the VCR/TV/DVD Switch to the VCR or DVD position Operating a JVC brand VCR or DVD player„ Showing the favourite channels VCRUsing the List Mode Press B button to go into the List modeTeletext function Basic operationHold Sub-pageReveal SizeCancel Press H Cancel buttonIndex Press the G Index buttonUsing the TV’s menu Press the Hbutton to display the menu barUsing the TV’s menu Picture menu „ Super DigiPure Features„ Digital VNR „ Picture Management „ Colour Management„ Movie Theatre „ Colour System „ 43 Auto AspectSound menu Centre BBESpeaker Features menu Sleep TimerChild Lock „ To set the Child Lock function„ To view a locked TV channel AppearanceBlue Back Favourite Setting Choose Favourite SETTING, then press the a or 3 buttonRefresh Choose Refresh Press the a buttonEDIT/MANUAL SET UP menuAuto Program „ Basic operation „ MoveChoose EDIT/MANUAL, then press the a or 3 button Press the 3 button to start the Move function„ Delete „ IDPress the yellow button to delete the TV channel Press the red button to start the ID function„ Insert „ ManualUnited Kingdom FranceLanguage Decoder EXT-2EXT Setting „ S-IN S-VIDEO inputID List DubbingTo cancel the S-IN S-VIDEO input setting „ ID ListPress the 5 or 6 buttons to choose an EXT terminal To erase a name assigned to the EXT terminalPicture Shift „ DubbingSlow FastConnecting to the computer Table of signals for each type of computerWhen a picture is not displayed Displaying a computer screen„ Allocation of signals to computer input terminals Pin no Signal name DetailsConnecting external equipment „ Connecting the PCBefore connecting anything Additional preparation„ Connecting headphones „ Connecting speakers/amplifier„ Video or sound signal output from the EXT-2 terminal „ T-V Link compatible VCR„ Using the TV speaker as the surround centre speaker CH/CC numbers ChannelCH/CC numbers Troubleshooting „ If you cannot turn on the TV„ If you cannot turn off the TV „ No picture or no sound„ Poor sound „ If the TV does not respond to the remote control„ Other issues Specifications We may change the design and specifications without noticeSpecifications Victor Company of JAPAN, Limited