PREPARATION FOR USE
ANTENNA/CABLE
CONNECTIONS
DIPOLE ANTENNA HOOK UP
1.Push the stem of the Dipole Antenna (accessory) into the hole for antenna at the back of TV/VCR.
2.Connect the flat
3.Plug the Matching Adapter to ANT terminal of TV/VCR as shown in drawing.
For the best reception, extend the Dipole Antenna and adjust its length and position. (Avoid handling the top section when making adjustments).
NOTE: If it is difficult to get good reception with the indoor antenna, the use of an outdoor antenna is recommended. Before an outdoor antenna is connect- ed to the set, the indoor antenna should be discon- nected.
Flat
Dipole Antenna (Supplied)
Matching Adapter (Supplied)
DC13.2V
ANT.
VHF/UHF COMBINED ANTENNA
A VHF UHF 75 ohm combination antenna can be connected to ANT terminal.
VHF/UHF SEPARATE ANTENNAS
In some areas it will be necessary to use an outdoor antenna.
| VHF Antenna (Not supplied) |
| UHF Antenna |
| (Not supplied) |
| VHF/UHF |
| Combiner |
DC13.2V | (Not |
| |
| supplied) |
ANT. |
|
| Flat |
CABLE WITHOUT CONVERTER/ DESCRAMBLER BOX
Use this connection if your cable system connects directly to your TV/VCR without a converter box. By using this connection you can:
1)Use the TV/VCR remote to select channels.
2)Program one or more unscrambled channels for Automatic Timer Recording.
NOTE: This unit will ONLY record and view the same channel.
From Cable System |
Cable (Not |
supplied) |
DC13.2V |
ANT. |
Antenna/Cable Connections Continued on the Next Page.
- 10 - | EN |
9J27