Sylvania 6427TE owner manual Preparation for USE, Operations

SLEEP 10

To cancel the sleep timer:

Press the SLEEP button repeated- ly until "SLEEP 0" is displayed.

PICTURE CHANNEL SET [ENG] / ESP / FRA V-CHIP SET UP CAPTION [OFF] TV SOUND [MAIN]

ADD/DELETE AUTO PRESET CH

PREPARATION FOR USE

LANGUAGE SELECTION

If you want to change the language of the on-screen menu, follow the proce- dure below.

1)	Connect the power cord to a standard AC outlet.
Note: If some digits appear in the corner of the screen,
press the POWER button without unplugging the power cord.
2)	Press the POWER button to turn on the TV.
3)	Press the MENU button so that the menu display appears
	on the TV screen.
4)	Press the CH(annel) ▲ or ▼ button to point to "[ENG]".
5)	Select "ENG(lish)", "ESP(añol)" or "FRA(nçais)" by using
	the VOL(ume) ▲ or ▼ button.

PICTURE CHANNEL SET [ENG] / ESP / FRA V-CHIP SET UP CAPTION [OFF] TV SOUND [MAIN]

PICTURE CHANNEL SET

[ENG] / ESP / FRA

V-CHIP SET UP CAPTION [OFF] TV SOUND [MAIN]

3)Press the VOL(ume) ▲ button so that "ADD/DELETE" is selected.

4)Use the CH(annel) ▲ or ▼ button to select the channel you wish to put into memory or to erase from memory.

Note: The display will return to the normal screen automatically in about 10 seconds.

Perform "ADD/DELETE" function while this display appears on the screen.

●Press the VOL(ume) ▲ or ▼ button to light up the channel number in LIGHT BLUE if you wish to add the channel into memory.

●Press the VOL(ume) ▲ or ▼ button to light up the channel number

in LIGHT RED if you wish to erase the channel from memory.

5) Press the MENU button to exit the menu.

ADD/DELETE AUTO PRESET CH

6) Press the MENU button to exit the menu.

MTS (Multi-Channel Television Sound) System

You can listen to a program in MTS stereo by following the steps below.

CHANNEL PRESETTING

NOTE: You MUST PRESET channels BEFORE using CHANNEL ▲ or ▼ button. To preset a channel or to change a preset channel, follow the procedure below.

1) Press the POWER button to turn on the TV.

2) Press the MENU button so that the menu display appears on the TV screen.

3) Press the CH(annel) ▲ or ▼ button to point to "CHANNEL SET". Then, press the VOL(ume) ▲ button.

4) Press the CH(annel) ▲ or ▼ button to point to "AUTO PRESET CH". Then, press the VOL(ume) ▲ button.

The tuner scans and memorizes all active channels in your area.

●The TV distinguishes between standard TV channels and cable (CATV) channels.

●When AUTO PRESET CH action is completed, the lowest memorized channel reappears on the screen.

●When you press the CH(annel) ▲ or ▼ button after selecting "AUTO PRESET CH", the tuner will stop at the memorized channels only.

●The TV may recognize TV channels to be CATV channels by receiving conditions. In this case, try AUTO PRESET CH action again in the fine receiving conditions.

●When AUTO PRESET CH is activated where there is no TV signal input, "NO TV SIGNALS" will appear on the display after the completion of the channel scanning.

[ADD/DELETE FUNCTION]
1) Press the MENU button so that the menu display appears on the TV	PICTURE
screen.	CHANNEL SET
	[ENG] / ESP / FRA
2) Press the CH(annel) ▲ or ▼ button to point to "CHANNEL SET".
	V-CHIP SET UP
Then, press the VOL(ume) ▲ button.	CAPTION [OFF]
	TV SOUND [MAIN]

Menu				To show the status, press the DISPLAY
Selection	MAIN	MONO	SAP	button on the remote control.
Type of
broadcast
Regullar	-None-	-None-	-None--	SAP: Second Audio Program, which
				means your program, can also be
Sttereo
	STEREO	MONO	STEREO	received in a second language or
broadcast
				sometimes a radio station.
SAP	MAIN	MAIN	SAP

[To Select STEREO, MONO or SAP in Stereo broadcast]

1)Press the MENU button so that the menu display appears on the TV screen.

2)Press the CH(annel) ▲ or ▼ button to point to "TV SOUND".

3)Press the VOL(ume) ▲ or ▼ button to select your desired stereo mode. ([MAIN], [MONO] or [SAP].)

: Press the VOL(ume) ▲ or ▼ button.

Menu		PICTURE		PICTURE
PICTURE
Selection	MAIN	CHANNELMONOSET	SAP
CHANNEL SET				CHANNEL SET
Type of		[ENG] / ESP / FRA		[ENG] / ESP / FRA
[ENG] / ESP / FRA
broadcast		V-CHIP SET UP		V-CHIP SET UP
V-CHIP SET UP	-None-
CAPTIONRegular[OFF]		CAPTION-None[OFF]-	-None-	CAPTION [OFF]
TV SOUND [MAIN]		TV SOUND [MONO]		TV SOUND [SAP]
Stereo	STEREO	MONO	STEREO
broadcast
SAP

RESUME FUNCTION

If the power fails or is disconnected while the TV is powered on, the TV will turn on automatical- ly when the power resumes.

OPERATIONS

WATCHING A TV PROGRAM

1) Press the POWER button to turn on the TV.

2) Select the desired channel with the CH(annel) ▲ or ▼ button.

3) Adjust the volume to the desired listening level using the VOL(ume) ▲ or ▼ button.

PICTURE ADJUSTMENT

1)Press the MENU button so that the menu display appears on the TV screen.

2)Press the VOL(ume) ▲ button so that "PICTURE" is selected.

3)Select the feature you wish to adjust with the CH(annel) ▲ or ▼ button and adjust it with the

4) Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT".)

SETTING THE SLEEP TIMER

The sleep timer function allows you to have the power automatically turn off after a set time period.

1)Press the POWER button to turn on the TV and press the SLEEP button on the remote control .

2) You may change the sleep time by pressing the SLEEP button on the remote control repeatedly. The timer can be set up to 90 minutes, 10 minutes each time the SLEEP button is pushed. (The timer display counts up and sleep timer will be displayed on the screen when you press the SLEEP button on remote control.)

Note: When you disconnect the unit from the AC outlet, or if you have a power failure, the sleep time will be lost.

VOL(ume) ▲ or ▼ button.

GAME MODE

Set to the most suitable position for TV GAME.

[+] : ON [ - ] : OFF

BRIGHT

Adjust until the darkest parts of the picture are as bright as you prefer.

[+] : increase brightness [-] : decrease brightness

CONTRAST

Adjust to increase or decrease contrast.

[+] : increase contrast [ - ] : decrease contrast

COLOR

Adjust to be brilliant or pale color.

[+] : be brilliant color [ - ] : be pale color

TINT

Adjust to obtain natural skin tones.

●In the above steps, the picture adjustment display will disappear from the TV screen automatically after about 10 seconds if you

do not press any buttons. Press the MENU and VOL(ume) ▲ button so that "PIC-

TURE" is selected. Then, press the CH(annel) ▲ or ▼ button repeatedly until the display returns to the screen.

●If you adjust any picture control after you set the Game mode to [ON], the Game mode is set to [OFF] automatically.

[USING THE GAME BUTTON]

You may also set the Game mode and external input mode at the same time by pressing the GAME button on the remote control. “GAME” appears on the TV screen.

● To exit the Game mode and external input

CLOSED CAPTION SELECTION

You may view specially labeled (cc) TV pro- grams, movies, news, prerecorded tapes, etc. with either a dialogue caption or text display added to the program.

: Press the VOL(ume) ▲ or ▼ button.

1)Press the MENU button so that the menu display appears on the TV screen.

2)Press the CH(annel) ▲ or ▼ button to point to "CAPTION".

3)Press the VOL(ume) ▲ or ▼ button to select the mode you wish.

4)When done, press the MENU button to exit the menu.

[+]: greenish tone [ - ] : reddish tone

SHARPNESS

Adjust to detail in the picture.

[+]:increase sharpness [-]:decrease sharpness

Notes:

●“+” is achieved by pressing the VOL(ume)

▲button and “-” by pressing the VOL(ume) ▼ button.

	mode, press the GAME button on the remote
	control again.
●	To cancel the Game mode only, adjust the
	picture control. The GAME mode will be set
	to [OFF] automatically as explained in the
	previous section. In this case, “VIDEO”
	(external input mode) instead of “GAME”
	appears on the TV screen.
●	If you press the GAME button when the TV
	is off, the TV turns on and will be in the
	Game mode and external input mode auto-
	matically.

PICTURE	PICTURE	PICTURE	PICTURE	PICTURE
CHANNEL SET	CHANNEL SET	CHANNEL SET	CHANNEL SET	CHANNEL SET
[ENG] / ESP / FRA	[ENG] / ESP / FRA	[ENG] / ESP / FRA	[ENG] / ESP / FRA	[ENG] / ESP / FRA
V-CHIP SET UP	V-CHIP SET UP	V-CHIP SET UP	V-CHIP SET UP	V-CHIP SET UP
CAPTION [OFF]	CAPTION [ C1]	CAPTION [ C2]	CAPTION [ T1]	CAPTION [ T2]
TV SOUND [MAIN]	TV SOUND [MAIN]	TV SOUND [MAIN]	TV SOUND [MAIN]	TV SOUND [MAIN]

: Press the CH(annel) ▲ or ▼ button.

[-]

GAME MODE [+]

[-]

BRIGHT

[+]

[-]CONTRAST [+]

[-]

COLOR

[+]

[-]

TINT

[+]

[-]SHARPNESS [+]

OFF

ON