Sylvania RSEF427E owner manual Preparation for USE, Operations

Page 3
SLEEP 10
To cancel the sleep timer:
Press the SLEEP button repeated- ly until "SLEEP 0" is displayed.
PICTURE CHANNEL SET [ENG] / ESP / FRA V-CHIP SET UP CAPTION [OFF] TV SOUND [MAIN]
PICTURE CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [OFF] TV SOUND [MAIN]
PICTURE
CHANNEL SET [ENG] / ESP / FRA V-CHIP SET UP CAPTION [OFF] TV SOUND [MAIN]
ADD/DELETE AUTO PRESET CH

PREPARATION FOR USE

LANGUAGE SELECTION

If you want to change the language of the on-screen menu, follow the proce- dure below.

1) Connect the power cord to a standard AC outlet. Note: If some digits appear in the corner of the screen,

press the POWER button without unplugging the power cord.

2)Press the POWER button to turn on the TV.

3)Press the MENU button so that the menu display appears

on the TV screen.

4) Press the CH(annel) or button to point to "[ENG]".

5) Select "ENG(lish)", "ESP(añol)" or "FRA(nçais)" by using the VOL(ume) or button.

6) Press the MENU button to exit the menu.

CHANNEL PRESETTING

To preset a channel or to change a preset channel, follow the procedure below. 1) Press the POWER button to turn on the TV.

2) Press the MENU button so that the menu display appears on the TV screen.

3) Press the CH(annel) or button to point to "CHANNEL SET". Then press the VOL(ume) button.

4)Press the CH(annel) or button to point to "AUTO PRESET CH". Then press the VOL(ume) button.

The tuner scans and memorizes all active channels in your area.

The TV distinguishes between standard TV channels and cable (CATV) channels.

When AUTO PRESET CH action is completed, the lowest memorized channel reappears on the screen.

When you press the CH(annel) or button after selecting "AUTO PRESET CH", the tuner will stop at the memorized channels only.

The TV may recognize TV channels to be CATV channels by receiving conditions. In this case, try AUTO PRESET CH action again after checking antenna connection.

When AUTO PRESET CH is activated where there is no TV signal input, "NO TV SIGNALS" will appear on the display after the completion of channel scanning.

[ADD/DELETE FUNCTION]

PICTURE

1) Press the MENU button so that the menu display appears on the TV

CHANNEL SET

screen.

[ENG] / ESP / FRA

V-CHIP SET UP

 

CAPTION [OFF]

 

TV SOUND [MAIN]

2)

Press the CH(annel) or button to point to "CHANNEL SET".

 

 

Then press the VOL(ume) button.

ADD/DELETE

3)

Press the VOL(ume) button so that "ADD/DELETE" is selected.

AUTO PRESET CH

 

4)

Use the CH(annel) or button to select the channel you wish to put

 

 

into memory or to erase from memory.

 

 

Note: The menu will disappear automatically in about 10 seconds.

 

 

Perform ADD/DELETE function while this display appears on the screen.

 

Press the VOL(ume) or button to highlight the channel number in LIGHT BLUE if you wish to add the channel into memory.

Press the VOL(ume) or button to highlight the channel number

in LIGHT RED if you wish to erase the channel from memory.

5) Press the MENU button to exit the menu.

MTS (Multi-Channel Television Sound) SYSTEM

You can listen to a program in MTS stereo by following the steps below.

 

Menu

 

 

 

 

 

To show the status, press the DISPLAY

 

Selection

 

 

 

 

 

 

MAIN

MONO

SAP

 

 

Type of

 

button on the remote control.

 

broadcast

 

 

 

 

 

 

 

Regular

-None-

-None-

-None-

 

 

 

Stereo

STEREO

MONO

STEREO

 

SAP: Second Audio Program, which

 

 

means your program, can also be

 

broadcast

 

 

 

 

 

 

 

 

received in a second language or

 

SAP

MAIN

MAIN

SAP

 

 

 

sometimes a radio station.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[To Select STEREO, MONO or SAP in Stereo broadcast]

1)Press the MENU button so that the menu display appears on the TV screen.

2)Press the CH(annel) or button to point to "TV SOUND".

3)Press the VOL(ume) or button to select your desired stereo mode ([MAIN], [MONO] or [SAP]).

: Press the VOL(ume) or button.

PICTURE

PICTURE

PICTURE

CHANNEL SET

CHANNEL SET

CHANNEL SET

[ENG] / ESP / FRA

[ENG] / ESP / FRA

[ENG] / ESP / FRA

V-CHIP SET UP

V-CHIP SET UP

V-CHIP SET UP

CAPTION [OFF]

CAPTION [OFF]

CAPTION [OFF]

TV SOUND [MAIN]

TV SOUND [MONO]

TV SOUND [SAP]

RESUME FUNCTION

If the power fails or is disconnected while the TV is powered on, the TV will turn on automatical- ly when the power resumes.

OPERATIONS

WATCHING A TV PROGRAM

1)Press the POWER button to turn on the TV.

2)Select the desired channel with the CH(annel) or button.

3)Adjust the volume to the desired listening level using the VOL(ume) or button.

4)Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT".)

PICTURE ADJUSTMENT

1)Press the MENU button so that the menu display appears on the TV screen.

2)Press the VOL(ume) button so that "PICTURE" is selected.

3)Select the feature you wish to adjust with the CH(annel) or button and adjust it with the VOL(ume) or button.

SETTING THE SLEEP TIMER

The sleep timer function allows you to have the POWER automatically turn off after a set time period.

1)Press the POWER button to turn on the TV and press the SLEEP button on the remote control .

2) You may change the sleep time by pressing the SLEEP button on the remote control repeatedly. The timer can be set up to 90 minutes. 10 minutes each time the SLEEP button is pressed (the timer display counts up and sleep timer will be displayed on the screen when you press the SLEEP button on remote control).

Note: When you disconnect the unit from the AC outlet or when you have a power failure, the sleep time will be lost.

CLOSED CAPTION SELECTION

You may view specially labeled (cc) TV pro-

1)

Press the MENU button so that the menu

grams, movies, news and prerecorded tapes,

 

display appears on the TV screen.

etc. with either a dialogue caption or text dis-

2)

Press the CH(annel) or button to point

play added to the program.

 

 

to "CAPTION".

 

 

 

 

3)

Press the VOL(ume) or button to

 

 

 

 

select the mode you wish.

 

 

 

 

4)

When done, press the MENU button to exit

: Press the VOL(ume) or button.

 

the menu.

 

 

 

 

 

 

PICTURE

PICTURE

PICTURE

 

PICTURE

PICTURE

CHANNEL SET

CHANNEL SET

CHANNEL SET

CHANNEL SET

CHANNEL SET

GAME MODE

Set to the most suitable position for video games.

[+]: ON [ - ] : OFF

BRIGHT

Adjust until the darkest parts of the picture are as bright as you prefer.

[+] : increase brightness [-] : decrease brightness

CONTRAST

Adjust to increase or decrease contrast.

[+]: increase contrast [ - ] : decrease contrast

COLOR

Adjust to be brilliant or pale color.

[+]: be brilliant color [ - ] : be pale color

TINT

Adjust to obtain natural skin tones.

[+]: greenish tone [ - ] : reddish tone

SHARPNESS

Adjust to detail in the picture.

[+]:increase sharpness [-]:decrease sharpness

Notes:

“+” is achieved by pressing the VOL(ume) button and “-” by pressing the VOL(ume) button.

In the preceding steps, the picture adjust- ment display will disappear from the TV

screen automatically after about 10 seconds if you do not press any buttons. Press the MENU and VOL(ume) button so that "PICTURE" is selected. Press the CH(annel)

or button repeatedly until the display returns to the screen.

If you adjust another picture control after you set Game mode to [ON], it will be set to [OFF] automatically.

[USING THE GAME BUTTON]

You can set Game mode and external input mode at the same time by pressing the GAME button on the remote control. “GAME” appears on the TV screen.

To exit Game mode and external input mode, press the INPUT SELECT button on the remote control.

To cancel Game mode only, follow the steps in “PICTURE ADJUSTMENT”. Game mode will be set to [OFF] automatically and “VIDEO2” (external input mode) instead of “GAME” appears on the TV screen.

If you press the GAME button when the TV is off, the TV turns on and will be in Game mode and external input mode automatically.

[ENG] / ESP / FRA

[ENG] / ESP / FRA

[ENG] / ESP / FRA

[ENG] / ESP / FRA

[ENG] / ESP / FRA

V-CHIP SET UP

V-CHIP SET UP

V-CHIP SET UP

V-CHIP SET UP

V-CHIP SET UP

CAPTION [OFF]

CAPTION [ C1]

CAPTION [ C2]

CAPTION [ T1]

CAPTION [ T2]

TV SOUND [MAIN]

TV SOUND [MAIN]

TV SOUND [MAIN]

TV SOUND [MAIN]

TV SOUND [MAIN]

: Press the CH(annel) or button.

[-]

GAME MODE [+]

[-]

BRIGHT

[+]

[-]CONTRAST [+]

[-]

COLOR

[+]

[-]

TINT

[+]

[-]SHARPNESS [+]

OFF

ON

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Image 3
Contents Closed Caption FeaturesPrecautions ANTENNA/CABLE ConnectionsUsing AUDIO/VIDEO Input Jacks Important SafeguardsRemote Control Rear Panel Installing the BatteriesOperations Preparation for USESpecifications Troubleshooting GuideMaintenance Supplied AccessoriesSubtítulos Narrativos CaracterísticasPrecauciones Conexiones DE LA ANTENA/CABLEInstalacion DE LAS Pilas Importante Para SU SeguridadPanel Trasero Control RemotoOperaciones Preparación Para LA UtilizaciónAccesorios Incluidos Operaciones SeguimientoGuia EN Caso DE Fallas Mantenimiento