PREPARATION FOR USE
LANGUAGE SELECTION
If you want to change the language of the on- screen menu, follow the procedure below.
1)Connect the power cord to a standard AC outlet.
2) Press the POWER but- ton to turn on the TV.
● | The TV distinguishes between standard TV |
| channels and cable (CATV) channels. |
● When AUTO MEMO action is completed, | |
| the lowest memorized channel reappears on |
| the screen. |
● | When you press the CH(annel) ▲ or ▼ but- |
| ton after selecting AUTO MEMO, the tuner |
| will stop at the memorized channels only. |
● | The TV may detect TV channels as CATV |
RESUME FUNCTION
If the power fails or is disconnected while the TV is powered on, the TV will turn on auto- matically when the power resumes.
OPERATIONS
3) Press the MENU but- ton so that the menu display appears
on the TV screen.
4) Press the CH(annel) ▲ or ▼ button to point to "[ENGLISH]".
5) Select "ENGLISH" or "ESPAÑOL" = Spanish by using
the VOL(ume) ▲ or ▼ button.
6) Press the MENU button to exit the menu.
CHANNEL PRESETTING
NOTE:You MUST PRESET channels BEFORE using CHANNEL ▲ or ▼ button. To preset a channel or to change a preset channel, follow the procedure below.
1)Press the POWER button to turn on the TV.
2)Press the MENU button so that the menu display appears on the TV screen.
3)Press the CH(annel) ▲
or ▼ button to point to "CHANNEL SET". Then, press the VOL(ume) ▲ button.
4) Press the CH(annel) ▲ or ▼ button to point to "AUTO MEMO".
Then, press the VOL(ume) ▲ button. The tuner scans and memorizes all active channels in your area.
channels if the receiving conditions are poor. |
In this case, try AUTO MEMO action again |
when receiving conditions are better. |
[ADD/DELETE FUNCTION]
1)Press the MENU button so that the menu display appears on the TV screen.
2)Press the CH(annel) ▲
or ▼ button to point to "CHANNEL SET". Then, press the VOL(ume) ▲ button.
3) Press the VOL(ume) ▲ button so that "ADD/DELETE" is selected.
4)Use the CH(annel) ▲ or ▼ button to select the channel you wish to
put into memory or to erase from memory. Note: The display will return to a normal screen in about 10 seconds.
Perform "ADD/DELETE" function while
this display appears on the screen.
●Press the VOL(ume) ▲ or ▼ button to light up the channel number
in LIGHT BLUE if you wish to add the channel into memory.
●Press the VOL(ume) ▲ or ▼ button to light
up the channel number
in LIGHT RED if you wish to erase the channel from memory.
5) Press the MENU button to exit the menu.
WATCHING A TV PROGRAM
1)Press the POWER button to turn on the TV.
2)Select the desired channel with the CH(annel) ▲ or ▼ button.
3)Adjust the volume to the desired listening level using the VOL(ume) ▲ or ▼ button.
4)Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT".)
SETTING THE SLEEP TIMER
The sleep timer function enables you to shut off the power without pressing the POWER button after a desired time period.
1)Press the POWER but- ton to turn on the TV and press the SLEEP button on the remote
control .
2)You may change the
sleep time by pressing the SLEEP
button on the remote control repeatedly. The timer can be set up to 90 minutes, 10 min- utes each time the SLEEP button is pushed. (The timer display counts up and sleep timer will be displayed on the screen when you press the SLEEP button on remote control.) Note: When you disconnect the unit from the AC outlet, or if you have a power failure, the sleep time will be lost.
To cancel the sleep timer:
Press the SLEEP button repeatedly until "SLEEP 0" is displayed.
CLOSED CAPTION SELECTION
You may view specially labeled (cc) TV pro- grams, movies, news, prerecorded tapes, etc. with either a dialogue caption or text display added to the program.
1)Press the MENU button so that the menu display appears on the TV screen.
2)Press the CH(annel) ▲ or ▼ button to point to "CAPTION".
3)Press the VOL(ume) ▲ or ▼ button to select the mode you wish.
4)When done, press the MENU button to exit the menu.
: Press the VOL(ume) ▲ or ▼ button.
PICTURE | PICTURE |
CHANNEL SET | CHANNEL SET |
[ENGLISH]ESPAÑOL | [ENGLISH]ESPAÑOL |
CAPTION [ T2] | CAPTION [OFF] |
| PICTURE |
| CHANNEL SET |
| [ENGLISH]ESPAÑOL |
| |
| CAPTION [ C1] |
PICTURE | PICTURE |
CHANNEL SET | CHANNEL SET |
[ENGLISH]ESPAÑOL | [ENGLISH]ESPAÑOL |
CAPTION [ T1] | CAPTION [ C2] |
OPERATIONS (continued)
PICTURE ADJUSTMENT
1)Press the MENU button so that the menu display appears on the TV screen.
2)Press the VOL(ume) ▲ button so that "PIC- TURE" is selected.
3)Select the feature you wish to adjust with the CH(annel) ▲ or ▼ button and adjust it
with the VOL(ume) ▲ or ▼ button.
●"+" is achieved by pressing the VOL(ume)
▲button and
GAME MODE
Set to the most suitable position for TV GAME.
[+]: ON
[ - ] : OFF
BRIGHT
Adjust until the whitest parts of the picture are as bright as you prefer.
[+]: increase brightness [ - ] : decrease brightness
CONTRAST
Adjust to increase or decrease contrast.
[+]: increase contrast [ - ] : decrease contrast
COLOR
Adjust to be brilliant or pale color.
[+]: be brilliant color [ - ] : be pale color
TINT
Adjust to obtain natural skin tones.
[+]: greenish tone [ - ] : reddish tone
Notes:
●In the above steps, the picture adjustment display will disappear from the TV screen automatically after about 10 seconds if you do not press any buttons, even though you may not be finished. Press the MENU and VOL(ume) ▲ button so that "PICTURE" is selected. Then, press the CH(annel) ▲ or ▼ button repeatedly until the display returns to
the screen.
●If you adjust the other Picture control after you set the Game mode to [ON], the Game mode is set to [OFF] automatically.
[USING THE GAME BUTTON]
You may also set the Game mode and external input mode at the same time by pressing the GAME button on the remote control. “GAME” appears on the TV screen.
●To exit the Game mode and external input mode, press the GAME button on the remote control again.
●To cancel the Game mode only, adjust the picture control. In this case, “VIDEO” instead of “GAME” appears on the TV screen.
●If you press the GAME button when the TV is off, the TV turns on and will be in the Game mode and external input mode auto- matically.
: Press the CH(annel) ▲ or ▼ button.
GAME MODE [+] | |
OFF | ON |
TINT | [+] | BRIGHT | [+] |
COLOR | [+] | CONTRAST [+] |
V-CHIP SET UP
To block certain ratings, follow the steps below.
●Programming may be rated by the Motion Picture Association of America (MPAA) or according to the Television Parental Guidelines. In order to block any inappropri- ate programming, set your limits in both places (MPAA RATING and TV RATING).
●You cannot access the menu when the "PROTECTED PROGRAM by ..." message appears. In this case, change to the unblocked channel, then press the MENU button.
[MPAA RATING SET UP]
1) Press the MENU but- ton so that the menu display appears on the TV screen.
2)Press the CH(annel) ▲ or ▼ button to point to
3)Use the number but- tons to enter
access code. The default access code is 0000. If you have not set up your personal
access code, you should use 0000.
4)Press the CH(annel) ▲ or ▼ button to point to "MPAA RATING". Then, press the VOL(ume) ▲ button.
5) Press the CH(annel) ▲ | B G | [VIEW] | ||
PG | [VIEW] | |||
or ▼ button to point to | [VIEW] | |||
R | [VIEW] | |||
your desired item. | ||||
[VIEW] | ||||
Then, press the | X | [VIEW] | ||
|
| |||
VOL(ume) ▲ button to select [BLOCK] or | ||||
[VIEW]. |
|
|
| |
|
|
| ||
<Selection> | <Rating Category |
| ||
Explanations> |
|
|
| |
• G: | General Audience |
| ||
• PG: | Parental Guidance suggested. | |||
•
•R:Restricted; under 17 requires accompanying
parent or adult guardian
•
•X:Mature audience only
●When you select the rating category and turn it [BLOCK], the higher rating will turn [BLOCK] automatically. Also, the lower rat- ing will turn [VIEW] automatically.
●When you turn "G" to [BLOCK] or [VIEW], the all ratings will turn to [BLOCK] or [VIEW] automatically.
●When you turn "X" to [VIEW], then all rat-
ings will turn to [VIEW] automatically.
6) Press the MENU button to exit the menu.
[TV RATING SET UP]
1)Press the MENU button so that the menu display appears on the
TV screen.
2) Press the CH(annel) ▲ or ▼ button to point to
Then, press the VOL(ume) ▲ button.
3) Use the number but- tons to enter
set up your personal access code, you should use 0000.