Search Function
Using Time Search |
| Marker Setup | ||||
|
|
|
|
|
|
|
1 Press [SEARCH MODE] repeatedly until the Time Search display appears during playback.
SEARCH
MODE
PLAY
TOTAL 1:29:00
2 Press the desired time location on the disc, using
the Number buttons within 0 seconds.
1 2 3
4 5 6
7 8 9
0
TOTAL 1:29:00
This feature allows you to assign a specific point on a disc to be called back later.
To set a marker
1 Press [SEARCH MODE] repeatedly until the marker display appears during playback.
SEARCH
MODE
PLAY
2 Use [s / B] to select the | 3 Press [ENTER] to set the |
markers. | markers. |
ENTER | ENTER |
|
Hint
•When there is no need to enter a number, “0” appears automati- cally.
For example, “0 :
•Press [CLEAR] to erase the incorrect input at step 2.
To return to the marker later
1 Press [SEARCH MODE] repeatedly until the marker display appears.
SEARCH
MODE
2 Use [s / B] to select | 3 Playback will restart from | ||||
markers. | the specific point which | ||||
|
|
| you have set as the | ||
|
|
| desired marker. | ||
|
| ENTER |
|
| ENTER |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
To exit the marker display
Press [RETURN 
] to exit the marker display.
RETURN
Hint
•Opening the disc tray or putting unit in standby mode will erase all markers.
•Selecting “AC” at step 2 in the section “To set a marker” or “To return to the marker later” will also erase all markers.
•To clear a marker, select the marker to be cleared at step 2 in the section “To set a marker” or “To return to the marker later,” and then press [CLEAR].
•The marker display will disappear in about 0 seconds when there is no out- put.
Functions
EN |