Sylvania DVL120E Setup Connections, Connection to a TV, Connection to an Audio System, Audio OUT

Setup

Connections

If your TV has AUDIO/VIDEO input jacks, see the following instructions. If not, see the section “Before using your DVD player” on the front page.

Connection to a TV

Setup

		Method 1
	Basic Audio	Good picture
TV	AUDIO IN
	R L	VIDEO IN

	Audio cable		Video
			cable
	(supplied)
			(supplied)
DVD player	AUDIO OUT	L
	DIGITAL AUDIO OUT
			VIDEO
			OUT
	COAXIAL R
	(Analog) AUDIO OUT		VIDEO OUT

Method 2		Method 3
Better picture		Best picture
	COMPONENT
	VIDEO IN
S-VIDEO IN	Y CB CR

S-Video		Component
		Video cables
cable
		(commercially
(commercially
		available)
available)
	Y	CR/PR
		COMPONENT
		VIDEO OUT
S-VIDEO	VIDEO CB/PB
OUT	OUT
S-VIDEO OUT	COMPONENT VIDEO OUT

Note

• Connect this unit directly to the TV. If the A/V cables are connected to a VCR, pictures may be distorted due to the copy protection system.

Connection to an Audio System

Method 1

Stereo system

Analog audio input jacks

RL

AUDIO

Audio cable
	(supplied)
	AUDIO OUT L
	DIGITAL AUDIO OUT
DVD player
(Analog)	COAXIAL R

AUDIO OUT

Method 2

Dolby Digital decoder, MD deck or DAT deck

Digital audio input jack

COAXIAL

Audio Coaxial

Digital cable

(commercially

available)

	AUDIO OUT L
	DIGITAL AUDIO OUT
DIGITAL	COAXIAL R
AUDIO OUT

Note

•If output is Dolby Digital encoded audio, connect to a Dolby Digital decoder, and set “DOLBY DIGITAL” to “ON” in the AUDIO menu. (Refer to pages 14-15)

•The audio source on a disc in a Dolby Digital 5.1 channel surround format cannot be recorded as digital sound by an MD or DAT deck.

•Unless connected to a Dolby Digital decoder, set “DOLBY DIGITAL” to “OFF” in the AUDIO menu. Playing a DVD using incorrect settings may genarate noise distortion, and may also damage the speakers. (Refer to pages 14-15)

•Set “DOLBY DIGITAL” to “OFF” in the AUDIO menu for con- necting to an MD deck or DAT deck. (Refer to pages 14-15)

– 6 – EN