Sylvania DP170SL8 owner manual Display Setting

BDISPLAY Setting

You can change the display functions. Follow steps 1 to 3 in the “CUSTOM Menu” section on page 20.

4	Select the desired item.			5
				TV ASPECT: QUICK
				(Default: 4:3 LETTER BOX)
		ENTER		See note on the right.
								Select the
						TV ASPECT			ENTER
				TV ASPECT	4:3 LETTERBOX			desired
						4:3 LETTER BOX
				STILL MODE	AUTO			setting.
						4:3 PAN & SCAN
	DISPLAY menu			PROGRESSIVE	OFF	16:9 WIDE
				PROGRESSIVE MODE	AUTO 1
				FORMAT	RGB	16:9 SQUEEZE		ENTER
				RGB RANGE	NORMAL
					ENTER
		DISPLAY
		TV ASPECT	4:3 LETTER BOX	STILL MODE: (Default: AUTO)
		PROGRESSIVE	OFF
		STILL MODE	AUTO	See note on the right.
	ENTER	PROGRESSIVE MODE	AUTO1					Select the
		FORMAT	RGB						ENTER
		RGB RANGE	NORMAL	TV ASPECT	4:3 LETTERBOX	STILL MODE		desired
						AUTO		setting.
				STILL MODE	AUTO
				PROGRESSIVE	OFF	FIELD
						FRAME
				PROGRESSIVE MODE	AUTO 1
								ENTER
				FORMAT	RGB
				RGB RANGE	NORMAL
					ENTER
				PROGRESSIVE MODE: (Default: AUTO1)
				See note on the right.				Select the	ENTER
				TV ASPECT	4:3 LETTERBOX	PROGRESSIVE MODE		desired
						AUTO1		setting.
				STILL MODE	AUTO
				PROGRESSIVE	OFF	AUTO2
						VIDEO
				PROGRESSIVE MODE	AUTO 1
								ENTER
				FORMAT	RGB
				RGB RANGE	NORMAL
					ENTER
				FORMAT: (Default: RGB)
				See note on the right.
				TV ASPECT	4:3 LETTERBOX	4:3 LETTERBOX
				STILL MODE	AUTO	AUTO
				PROGRESSIVE	OFF	OFF
				PROGRESSIVE MODE	AUTO 1	AUTO1
				FORMAT	RGB	YCbCr
				RGB RANGE	NORMAL	NORMAL
					ENTER
				RGB RANGE: (Default: NORMAL)
				See note on the right.
				TV ASPECT	4:3 LETTERBOX	4:3 LETTERBOX
				STILL MODE	AUTO	AUTO
				PROGRESSIVE	OFF	OFF
				PROGRESSIVE MODE	AUTO 1	AUTO1
				FORMAT	RGB	RGB
				RGB RANGE	NORMAL	ENHANCED
					ENTER
5	PROGRESSIVE: QUICK				If “PROGRESSIVE” is “ON”,
	(Default: OFF)				this message appears:
	See note on the right.							Select “YES”.
						Before proceeding…
	TV ASPECT	4:3 LETTERBOX		4:3 LETTERBOX		1. Make sure your TV has progressive scan.
					SETUP	2. Connect with component video cable
	STILL MODE	AUTO		AUTO		NOTE: If there is no picture or picture is
									ENTER
	PROGRESSIVE	OFF		ON		distorted after selecting “YES”,
						wait about 15 seconds for auto recovery.
	PROGRESSIVE MODE	AUTO 1		AUTO 1		Activate Progressive?		YES
								NO
	FORMAT	RGB		RGB		SELECT: K / L	SET:ENTER
	RGB RANGE	NORMAL	ENTER	NORMAL

6To exit the menu

SETUP

Note:

TV ASPECT:

•Select “4:3 LETTER BOX”, so that black bars may appear on the top and bottom of the screen.

•Select “4:3 PAN & SCAN” for a full height picture with both sides adjusted.

•Select “16:9 WIDE” if a wide-screen TV is connected to this unit.

•Select “16:9 SQUEEZE” when the TV screen is too large horizontally at “16:9 WIDE”

setting and when it is possible to adjust the screen size using the TV’s controls.

STILL MODE:

•Select “AUTO” usually.

•If you select “AUTO”, it automatically selects the best resolution setting (“FRAME” or “FIELD”) based on the data characteristics of the pictures. (default)

•If you select “FIELD”, the picture in the still mode will be stabilized.

•If you select “FRAME”, the picture in the still mode will be highly defined.

•An individual picture on TV screen is called a “frame”, which consists of two separate images called as “field”.

•Some pictures may be blurred at the “AUTO” setting in the still mode due to their data characteristics.

PROGRESSIVE MODE:

•You can select a mode below for the progressive scan output.

•AUTO1: mode suitable for images on the film material.

•AUTO2: mode for images on the material of 30- frame film.

•VIDEO: mode for video material.

FORMAT:

•Select an HDMI output mode between “YCbCr” and “RGB”.

•When the connected device is not compatible with YCbCr, HDMI signal is output as RGB regardless of the setting.

•This setting is effective only when you use the HDMI connection.

RGB RANGE:

• Select a HDMI picture mode

between “NORMAL” and

“ENHANCED”.

• Select “ENHANCED” if the

black- white contrast is not

DVD FUNCTIONS

6 To complete the

PROGRESSIVE setting

ENTER

If there is no picture or you
do not press any buttons
for 15 seconds, Progressive
Scan will switch to “OFF”.
		Select “YES”.	ENTER
	Confirm again to use progressive scan.
	If Picture is good, Select “YES”.	ENTER
	NO
	YES
	SELECT: K / L SET:ENTER

clear.

• This setting is effective only for

HDMI RGB output.

PROGRESSIVE:

•You can set “PROGRESSIVE” to “OFF” either in “DISPLAY” menu or by pressing and hold- ing

[PLAY B] on the front of the unit for more than 5 seconds.

•When “PROGRESSIVE” is “ON”, video signals from VIDEO OUT and S-VIDEO OUT jacks will be distorted or not be output at all.

– 21 –

EN