Daewoo DTQ 14U5SC, DTQ 13V6FCP, DTQ 13V6FCB, DTQ 19V6FCB, DTQ 19V6FCP Troubleshooting

Page 27

C H A P T E R

6

Troubleshooting

Your Daewoo television is designed to give you trouble-free performance for many years. If you have a problem with your TV, try the solutions listed below.

If the suggestions listed below do not solve your problem, contact your Daewoo dealer or an autho- rized Daewoo service center. You can also call Daewoo directly at 1-800-DAEWOO8.

There is no picture or sound, or the TV dosen't turn on.

Make sure the TV is plugged in.

Make sure the MUTE is not set.

Make sure the power is on.

If there is neither picture or sound, unplug the TV for 30 seconds, then plug it in and try again.

There is no picture or sound on some UHF channels.

Try another station. If the other stations are OK, it may be a station problem.

Check that the antenna is connected, is in good working order, has no broken wires, and is adjust- ed correctly.

See if anything is interfering with the antenna signal.

Make sure the AIR/CABLE setting is correct.

The sound is OK, but the picture is poor.

Try another station. If the other stations are OK, it may be a station problem.

Check that the antenna is connected and is in good working order, has no broken wires, and is adjusted correctly.

The picture is OK, but the sound is poor.

Try another station. If the other stations are OK, it may be a station problem.

Check that the antenna is connected, is in good working order, has no broken wires, and adjusted correctly.

There is poor reception on some channels.

Try another station. If the other stations are OK, it may be a station problem.

Check that the antenna is connected, is in good working order, has no broken wires, and is adjust- ed correctly.

You cannot tune to a cable channel.

Make sure the AIR/CABLE setting is correct.

The channel may not be programmed into memory.

The picture rolls, slants, shows lines, is grainy, has poor color, or has ghosts.

Try another station. If the other station are OK, it may be a station problem.

Check that the antenna is connected, is in good working order, has no broken wires, and is adjust- ed correctly.

See of anything is interfering with the antenna signal.

The remote control does not work.

Make sure the TV is plugged in.

Make sure there are fresh batteries in the remote control.

Make sure there is nothing blocking the remote control signal.

24Chapter 6 : Troubleshooting

Image 27
Contents Color Television Risk of Electric Shock Daewoo Electronics Corporation of America Table of Contents Important Safeguards Important Safeguards Your TVs Front Panel Overview of Your EquipmentAntenna terminalANT Your TVs Back PanelVchw Your Remote Controls 43A01 43A02Installing your remote control batteries Connecting an Antenna Connecting an Antenna or Cable to Your TVAntennas with two sets of leads Connecting a cable systemSafety Note Connecting Other Pieces of EquipmentOperating Your TV Turning Your TV OnProgramming Your TVs Channel Memory Changing Channels Changing the VolumeChanging the TVs Channel Memory Displaying the Current ChannelAdding/Deleting a channel to memory Changing the TVs Input Adjusting Video Settings Descriptions of video settings Returning to the factory settingsUsing Timer Functions Setting the ClockSettings the Wake-Up Time Canceling the Wake-Up Time or Off Time Setting the Off TimeSetting the Sleep Timer Additional Features Changing the Language of the On-screen MenusCaptioning CC on Mute Power RestoreParental Control Parental Control SettingsDescription of Parental Control Settings Troubleshooting Model Parts Labor Picture Tube WarrantyDaewoo Electronics Corporation America