Daewoo DTH-2930SSFV, CM-405F service manual Alignment Instruction

ALIGNMENT INSTRUCTION

4-2) Vertical Position Adjustment.

-Select V.SLOPE item, adjust V.SLOPE data value till the horizontal line in the centre of the video signal is just at the position where the blanking stars.

-Select V.CENTER item, adjust V.CENTER data value to center the raster properly on the screen.

4-3) Vertical Size Adjustment

- Select V.SIZE item, adjust V.SIZE data value to proper vertical size as follows.

4-4) Horizontal Position Adjustment

-Select H.CENTER item, adjust H.CENTER data value to obtain proper horizontal centering of the internal cross pattern at the left and right of the screen.

4-5) Horizontal Size adjustment

- Select H.SIZE item, adjust H.SIZE value to proper horizontal size.

-11-