Disconnect the power cord before replacing a fuse and always replace with the same type fuse.
Fuse Replacement
With a flat head screwdriver wedge the fuse holder out of its housing. Remove the damaged fuse from its holder and replace with exact same type fuse. Insert the fuse holder back in its place and reconnect power.
The fuse is located inside this compartment. Remove using a flat head screwdriver.
Mounting
ORIENT AT ION
This fixture should only be mounted/used on a flat surface. This fixture may not be tilted.
RIGGING
It is important never to obstruct the vents pathways. Mount the fixture using, a suitable “C” or “O” type clamp.
When selecting installation location, take into consideration the fluid reservoir access and routine maintenance.
Safety cables must always be used, utilizing the provided safety eye bolt.
Never mount in places where the fixture will be exposed to rain, high humidity, extreme temperature changes or restricted ventilation.
Hanging Clamp
Angled Down
Note!
Clamp is sold separately.
Angled Up
Hurricane™ 1300 User Manual | 7 | 3/26/2009 3:18 PM |