Daewoo DSC-3210EGB manual Daily USE, 1111, Stereo

DAILY USE

SWITCHING ON TV SET

1)If stand-by indicator (B5) is red, then the TV set is in stand-by mode.

You can switch on using the remote control POWER button (A1), the NUMBER 0….9 buttons (A3), or PROGRAM UP (A6) / DOWN (A21) buttons. The front panel PROGRAM UP/DOWN buttons (B2) can also be used.

Once on, the stand-by indicator turns to green and the picture appears on the screen.

2)If stand-by indicator (B5) is not lit, then the TV set is powered off.

You must press the TV set front panel MAIN POWER button (B1). If a picture does not appear, then the stand-by indicator will be red. In this case, use the remote control as indicated in 1).

PR

MENU

PR

3)If stand-by indicator (B5) is flashing red, and green then the TV set is in child-lock mode.

It is necessary to use the remote control POWER button (A1), NUMBER 0….9 buttons (A3), or PROGRAM UP (A6) / DOWN (A21) buttons. The front panel PROGRAM UP/DOWN buttons (B2) will not function.

Once on, the stand-by indicator turns to green and the picture appears on the screen.

	1) By pressing the remote control	2) Pressing the TV set front panel
SWITCHING OFF	POWER button (A1) ,you can	MAIN POWER button (B1), you
	switch off to stand-by mode (low	can completely power off the TV
TV SET	power consumption mode) which	set. In this case, you must use the
	also allows quick restart by remote	same front panel POWER button
	control (see above: SWITCHING	(B1) to switch on again (see
	ON TV SET).	above: SWITCHING ON TV SET).

Remark: If a broadcast signal is not present after 30 minutes, the TV set will be automatically turned to stand-by mode.

PROGRAM SELECTION (FROM 0 TO 99)

Direct selection

Use the remote control NUMBER 0….9

buttons (A3).

For two digits program numbers, enter the second digit within 2 seconds.

Up / Down selection

Use the remote control PROGRAM UP (A6) / DOWN (A21) buttons or the TV set front panel

PROGRAM UP / DOWN buttons (B2).

SOUND CONTROL

Volume adjustment
Use the remote control VOLUME UP	MENU
(A20) / DOWN (A7) buttons or the TV set
front panel VOLUME UP / DOWN
buttons (B3).

Mute

Mute the sound by pressing the remote control SOUND MUTE button (A2).

Then, logo is displayed. The previous sound setting is returned after pressing the same button a second time.

Mono forcing, dual language

- If you are unable to get good sound quality for a program due to poor reception, you can force a change from stereo to mono transmission by pressing the remote control MODE button (A14). Then the program status display indicates "MONO" (in red).

- On the other hand, during a program with dual language transmission, the MODE button (A14) allows you to toggle between the first and second language. The program status display will indicate "DUAL 1" or "DUAL 2" (plus NICAM according to the received signal).

- To return to initial state, press again the MODE button (A14).

Sound effects

A SPATIAL sound effect is available, using the remote control 3D (A13) button.

The following display appears:

SPATIAL	Spatial sound effect
	Sound transmission mode
STEREO
11:11	Clock

To return to initial sound effect, press again the 3D (A13) button.

The following display appears:

OFF	No sound effect
	Sound transmission mode
STEREO
11:11	Clock

As an option, the sound effects PANORAMA, and VIRTUAL DOLBY are available with the same button.

For other adjustments (balance, equalizer, bass, treble), use the Sound menu (page8).

6