ALIGNMENT INSTRUCTION
1. SERVICE MODE ADJUSTMENTS
Follow the steps below whenever service adjustment is required. See Table- A and Table- B to determine if service adjustments are required.
1)How to enter the service mode using the user remote control.
•Turn the set on.
•Direct the remote control to the reception window of TV.
•Push buttons of remote control in sequence as follows.
1 Æ MUTE Æ DISPLAY Æ MUTE
•Then, the screen will appear as follows.
S2 SCRN
S5 IFC
S6 GEO
S8 W/B
S9 DP
S12 FACT
•Using the channel up or channel down button, select the item you wish to adjust. (The color of selected item turns into the red.)
•Press the volume up or down button to enter in the service mode you wish to adjust.
2)How to memorize the adjusted values in the service mode.
•Must press DISPLAY button the state which the screen is displaying each of service menus after all adjustments are completed each of all service menu.
PART | ADJUSTMENT | NOTES | ||
|
| |||
REPLACED | NECESSARY | UNNECESSARY | ||
| ||||
|
| |||
|
|
|
| |
I701 |
| O | Data is stored in I703. | |
|
| |||
|
|
| ||
|
|
|
| |
I101 |
| O |
| |
(MAIN) |
|
| ||
|
|
| ||
|
|
|
| |
I702 |
|
| Initial setting values are written from I701. | |
(EEPROM) |
|
| ADJUSTING ITEMS | |
|
|
| S5 : RFAGCD | |
| O |
| S6 : H.PHASE/V.POSI/V.SIZE | |
|
|
| S8 : RD/GD/BD/RB/GB/BB | |
|
|
| S9 Subbrightness | |
CRT
O
Adjust items related to picture tube only.(White Balance adjustment)