Daewoo DTQ 13P2FC Returning to the factory settings, Descriptions of video settings

Returning to the factory settings

If you would like to return to the original video settings, as they were calibrated at the factory, follow these steps :

1With the TV on, press the MENU button. then “Video” menu will appear.

2Press the CVOLB buttons to set the “Settings” to ‘Preset’.

The TV will remember the ‘Custom’ settings you had previously chosen. When you set “Settings” to ‘Custom’ again, your previous custom settings will be restored.

1		2
Video		Video
Settings :	Custom	Settings :	Preset

Contrast : Contrast :

Brightness Brightness

Sharpness Sharpness

Color	Color
Tint	Tint

Select Adjust Next Select Adjust Next

Descriptions of video settings

The contrast setting controls the relation between the light and black areas of the screen. If the light areas are too bright and are losing details, press the CVOL but- ton; if the picture is gray and lacks contrast, press the VOLB button.

The brightness settings controls the overall amount of light in the picture. If the pic- ture is too bright, press the C VOL button; if the picture is too dark, press the VOL

Bbutton.

Sharpness controls how the TV displays edges of objects on-screen. If the TV shows multiple vertical lines at the edges of an object, press the CVOL button; if the verti- cal edges of on-screen objects are fuzzy, press the VOL B button.

The color setting controls the intensity of color. If the color is over-saturated, press the VOLB button; if the color is washed out, press the VOL B button.

The tint setting controls the relationship of red and green in a picture. Tint is espe- cially noticeable in flesh tones. If flesh tones seem too red or purple, press the VOLB button; if flesh tones are too green, press the VOLB button.

14 Chapter 3: Operating Your TV