How to Connect
Desktop PC
Before starting, make sure that the projector and computers are both turned off.
1. Connect the computer cable.
Connect either end of the computer cable to the projector’s Computer in 1 or Computer in 2
Disconnect the monitor cable from the computer and connect the other end of the terminal where the monitor cable is disconnected from the computer.
If needed, connect the monitor cable of the computer monitor to the projector’s Monitor Out.
Tighten the screw on all connectors.
2. Connect the audio cable if necessary.
Connect one end of the audio cable to the Audio in jack on the projector.
Connect the other end of the audio cable to the audio output port on the computer.
VGA
Desktop PC
28