ALIGNMENT INSTRUCTIONS
5)WHITE BALANCE ADJUSTMENT(S8)
∙Receive a good local channel.
∙Enter the service mode and select service adjustment S8.
∙You can see the OSD as shown in below.
RD | 64 |
BD | 64 |
RB | 128 |
GB | 128 |
BB | 128 |
MOVE | ADJUST RECALL : SET |
∙Using volume up or volume down, adjust service adjustment data of RD/GD/BD and RB/GB/BB until a good gray scale with normal whites is obtained.ALIGNMENT INSTRUCTIONS
∙Press the DISPLAY button to memorize the data.
6)DIGITAL PRESET(D.P) ADJUSTMENTS(S9) SUBBRIGHTNESS ADJUSTMENT
∙Receive a good local channel.
∙Enter the service mode and select service adjustment S9.
∙You can see the OSD as shoown in below.
D.P. |
|
BRIGHTNESS | 75 |
CONTRAST | 10 |
TINT | 36 |
COLOR | 15 |
SHARPNESS | 38 |
MOVE | ADJUST RECALL : SET |
∙Select Subbrightness item, adjust Subbrightness data value to obtain normal brightness level.
∙Press the DISPLAY button to memorize the data.
CONTRAST
∙Fixed value = 10
TINT
∙Fixed value = 36
COLOR
∙Fixed value = 15
SHARPNESS
∙Fixed value = 38
7)FACTORY OUTGOING MODE (S12 : FACT)
∙If you select the S12, then the set becomes factory outgoing status.
∙You can see the OSD Òoutgoing OKÓ
11