ALIGNMENT INSTRUCTIONS
4)GEOMETRIC ADJUSTMENTS (S6)
•Enter the service mode and select service adjustment S6.
•You can see the OSD as shown in below.
GEOMETRY |
|
|
H. SHIFT |
| 09 |
V. SHIFT |
| 02 |
V. SIZE |
| 38 |
VBLK SHIFT |
| 03 |
VBLK SHIFT ON | NO | |
NO SD POWER OFF | NO | |
MOVE | ADJUST | RECALL:SET |
4-1. Horizontal SHIFT Adjustment
•Select H.SHIFT item, adjust H.SHIFT data value to obtain proper horizontal centering of the internal cross pattern at the left and right of the screen.
•Select V.SHIFT item, adjust V.SHIFT data value to center the raster properly on thescreen.
•Select “V.SIZE” item, adjust “V.SIZE” data value to proper vertical size as follows.
10