Preparation for USE, Operations | Emerson EWT1321 specs

SLEEP 10

To cancel the sleep timer:

Press the SLEEP button repeated- ly until "SLEEP 0" is displayed.

PREPARATION FOR USE

LANGUAGE SELECTION

If you want to change the language of the on-screen menu, follow the procedure below.

Press the CH(annel) ▲ or ▼ button to point to "AUTO MEMO".

Connect the power cord to a standard AC outlet.

Press the POWER button to turn on the TV.

Press the MENU button so that the menu display appears on the TV screen.

Press the CH(annel) ▲ or ▼ button to point to "[ENGLISH]".

Select "ENGLISH" or "ESPAÑOL" = Spanish by using the VOL(ume) ▲ or ▼ button.

PICTURE CHANNEL SET [ENGLISH]ESPAÑOL V-CHIP SET UP CAPTION [OFF]

Then, press the VOL(ume) ▲ button.

The tuner scans and memorizes all active channels in your area.

●The TV distinguishes between standard TV channels and cable channels.

●When AUTO MEMO action is completed, the lowest memorized channel reappears on the screen.

●When you press the CH(annel) ▲ or ▼ button after

selecting AUTO MEMO, the tuner will stop at the memorized channels only.

●The TV may recognize TV channels to be CATV channels

by the receiving conditions. In this case, try AUTO MEMO action again in the fine receiving conditions.

ADD/DELETE AUTO MEMO

Press the MENU button to exit the menu.

CHANNEL PRESETTING

[ADD/DELETE FUNCTION]

1) Press the MENU button so that the menu display appears on the TV

screen.

2) Press the CH(annel) ▲ or ▼ button to point to "CHANNEL SET".

Then, press the VOL(ume) ▲ button.

3) Press the VOL(ume) ▲ button so that "ADD/DELETE" is selected.

4) Use the CH(annel) ▲ or ▼ button to select the

PICTURE CHANNEL SET [ENGLISH]ESPAÑOL V-CHIP SET UP CAPTION [OFF]

To preset a channel or to change a preset channel, follow the procedure below.

Press the POWER button to turn on the TV.

Press the MENU button so that the menu display appears on the TV screen.

Press the CH(annel) ▲ or ▼ button to point to "CHANNEL SET". Then, press the VOL(ume) ▲ button.

PICTURE CHANNEL SET [ENGLISH]ESPAÑOL V-CHIP SET UP CAPTION [OFF]

PICTURE CHANNEL SET [ENGLISH]ESPAÑOL

channel you wish to put into memory or to erase from memory.

Note: The display will return to the screen in about 10 seconds.

Perform "ADD/DELETE" function while this display appears on the

screen.

●Press the VOL(ume) ▲ or ▼ button to light up the channel number in LIGHT BLUE if you wish to add the channel into memory.

●Press the VOL(ume) ▲ or ▼ button to light up the channel number

in LIGHT RED if you wish to erase the channel from memory.

5) Press the MENU button to exit the menu.

ADD/DELETE AUTO MEMO

V-CHIP SET UP CAPTION [OFF]

RESUME FUNCTION

If the power fails or is disconnected while the TV is powered on, the TV will turn on automatical- ly when the power resumes.

OPERATIONS

WATCHING A TV PROGRAM

1)Press the POWER button to turn on the TV.

2)Select the desired channel with the CH(annel) ▲ or ▼ button.

3)Adjust the volume to the desired listening level using the VOL(ume) ▲ or ▼ button.

4)Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT".)

PICTURE ADJUSTMENT

1)Press the MENU button so that the menu display appears on the TV screen.

2)Press the VOL(ume) ▲ button so that "PICTURE" is selected.

3)Select the feature you wish to adjust with the CH(annel) ▲ or ▼ button and adjust it with the VOL(ume) ▲ or ▼ button.

SETTING THE SLEEP TIMER

The sleep timer function enables you to shut off the power without pressing the POWER button after a desired time period.

1)Press the POWER button to turn on the TV and press the SLEEP button on the remote control .

2) You may change the sleep time with pressing the SLEEP button on the remote control repeatedly. The timer is set up to 90 minutes, 10 minutes each time the SLEEP button is pushed. (The timer display counts up and sleep timer will be displayed on the screen when you press the SLEEP button on remote control.)

Note: When you disconnect the unit from the AC outlet, or if you have a power failure, the sleep time will be lost.

GAME MODE

Set to the most suitable position for TV GAME.

[+]: ON [-] : OFF

BRIGHT

Adjust until the whitest parts of the picture are as bright as you prefer.

[+]: increase brightness [-] : decrease brightness

CONTRAST

Adjust to increase or decrease contrast.

[+]: increase contrast [-] : decrease contrast

COLOR

Notes:

●In the above steps, the picture adjustment display will disappear from the TV screen after about 10 seconds unless you press any buttons, even though you may not be fin- ished. Press the MENU and VOL(ume) ▲ button so that "PICTURE" is selected. Then, press the CH(annel) ▲ or ▼ button repeat- edly until the display returns to the screen.

●If you adjust the other Picture control after you set the Game mode to [ON], the Game mode is set to [OFF] automatically. If you want to set the Game mode, reset it to [ON].

CLOSED CAPTION SELECTION

You may view specially labeled (cc) TV pro- grams, movies, news, prerecorded tapes, etc. with either a dialogue caption or text display added to the program.

: Press the VOL(ume) ▲ or ▼ button.

1)Press the MENU button so that the menu display appears on the TV screen.

2)Press the CH(annel) ▲ or ▼ button to point to "CAPTION".

3)Press the VOL(ume) ▲ or ▼ button to select the mode you wish.

4)When done, press the MENU button to exit the menu.

Adjust to be brilliant or pale color.

[+]: be brilliant color [-] : be pale color

TINT

Adjust to obtain natural skin tones.

[+]: greenish tone [-] : reddish tone

: Press the CH(annel) ▲ or ▼ button.

PICTURE	PICTURE	PICTURE	PICTURE	PICTURE
CHANNEL SET	CHANNEL SET	CHANNEL SET	CHANNEL SET	CHANNEL SET
[ENGLISH]ESPAÑOL	[ENGLISH]ESPAÑOL	[ENGLISH]ESPAÑOL	[ENGLISH]ESPAÑOL	[ENGLISH]ESPAÑOL
V-CHIP SET UP	V-CHIP SET UP	V-CHIP SET UP	V-CHIP SET UP	V-CHIP SET UP
CAPTION [OFF]	CAPTION [ C1]	CAPTION [ C2]	CAPTION [ T1]	CAPTION [ T2]

[-]

GAME MODE [+]

[-]

BRIGHT

[+]

[-]CONTRAST [+]

[-]

COLOR

[+]

[-]

TINT

[+]

OFF