PLAYBACK
NORMAL PLAYBACK
Make sure ...
•TV/DVD/VHS power must be turned on.
1Insert a prerecorded tape
If the
2 To begin playback | PLAY B |
Press the PLAY button.
3 To stop playback | STOP |
Press the STOP button when play- back is completed.
NOTES:
•If you press the TV/VCR side PLAY button in the DVD mode, you can start the VCR playback.
•If you press the SELECT button in the VCR playback, it will stop and the mode will change to the DVD mode. In addition, the same function operates with the DVD side PLAY button or OPEN/CLOSE button.
SLOW MOTION
During pause, press the FWD button to reduce the playback speed. The TV/DVD/VHS mutes the sound during slow motion. Press the PLAY button to return to normal playback.
NOTE: If it is left in the Slow mode for more than five minutes, the TV/DVD/VHS will automatically go into the Stop mode.
PICTURE SEARCH
This feature is very useful in finding or skipping over a particular scene on a tape. In this mode, the sound will be muted.
1)You may view a video tape at a high speed in either a forward or reverse direction by pressing the F.FWD or REW button. (in the SP / LP / SLP modes)
NOTE:
•If you press the F.FWD or REW button in the DVD mode, the VCR forward or reverse will start. Please press the STOP button to stop it.
2)Press it again and the TV/DVD/VHS will now search in super high speed. (in the LP / SLP modes only)
NOTE: Tapes recorded in the SP or LP mode will display a noise bar on the TV screen and the pic- ture may revert to Black and White. This is normal.
3)Press the PLAY button to return to normal speed.
TRACKING ADJUSTMENT
• Tracking adjustment will be set automatically | STILL PICTURE |
| |
You can view a still picture on the TV screen during | |||
(Digital Tracking function) when you start play- | |||
playback (the Still mode). Press the PAUSE button | |||
back. | |||
during playback. Only tapes recorded in the SLP |
| ||
• However when playing |
| ||
mode will show the least amount of lines.Press the | |||
recorded on units other than your own, noise lines | PLAY button to return to playback. |
| |
(black and white streaks) may appear on the play- |
| ||
NOTES: |
| ||
back picture. If this occurs, you can adjust the |
| ||
• You can advance the picture one frame at a time by | |||
tracking control manually by pressing the CHAN- | |||
pressing the PAUSE button during the Still mode. | |||
NEL K or L button until the streaks disappear. To | |||
• If it is left in the Pause mode for more than five |
| ||
return to the DTR function, stop the tape once and |
| ||
minutes, the TV/DVD/VHS will automatically |
| ||
start playback again. |
| ||
switch to the Stop mode. |
| ||
• You can reduce the noise lines by pressing the |
| ||
|
| ||
CHANNEL K or L button in slow mode, too. | VERTICAL HOLD CONTROL | ||
Tracking adjustment in Slow mode will not be set | |||
automatically. | In the Pause/Still mode only, when the picture begins | ||
NOTE: | |||
to vibrate vertically, stabilize the picture by pressing | |||
• In Still mode, press the SLOW button and press the | the CHANNEL K or L button. |
| |
CHANNEL K or L button until streaks disappear. | NOTE: |
| |
To return to Still mode, press the PAUSE button | If there are video noise lines on the screen, see Tracking | ||
again. | Adjustment section. |
| |
- 26 - | EN |
1C29