CRESTRON CNTV | Cresnet Television Control Unit |
MRMT11 VersiPort Set Analog Threshold Menu
1- VersiPort 1
2- VersiPort 2
3- VersiPort 3
4- VersiPort 4
0 - Return to previous menu
To set the VersiPort Analog Threshold for each pin in the DIGITAL IN/OUT port, depress the corresponding menu number. Therefore , to set pin 1, depress 1 on the keyboard. Enter two hexadecimal digits as the threshold value for each VersiPort pin. For example, entering the hexadecimal value of 40 (1.25 volts) is a good threshold for TTL logic.
Test Analog Inputs
Depressing "4" from the MRMT11 VersiPort Test Menu opens the MRMT11 VersiPort Analog Input Test Menu which appears on the screen as six lines of text.
MRMT11 VersiPort Analog Input Test Menu
1- VersiPort 1
2- VersiPort 2
3- VersiPort 3
4- VersiPort 4
0 - Return to previous menu
To initiate the VersiPort Analog Input Test for each pin in the DIGITAL IN/OUT port, depress the corresponding menu number. For example, to test pin 1, depress 1 on the keyboard.
The MRMT11 VersiPort Analog Input Test begins by the PC prompting the user to depress the space bar to initialize the test. This test indicates whether the threshold value is exceeded. As long as the value read at the VersiPort is greater than or equal to the threshold value, an asterisk (*) appears on the screen every quarter second. If the value read at the VersiPort is less than the threshold value, a dash
R E M O T E C O N T R O L S Y S T E M S | 16 | DOC. 8105B |
|