14
To select a sub page
If the page of text you are viewing contains sub pages, the number of the sub page you are on and the total number of sub pages is displayed on the right of the screen i.e. 1/7.
To select a sub page press the Sub button. The number in the top left hand corner will be replaced by S followed by 4 asterisks.
Enter the number of the sub page, using the Numeric buttons in the format S0001 for sub page 1.
The teletext will search for the sub page. This may take some time. To return to the TV whilst the teletext is searching press the Update button.
When the page number is found it will appear in the top left hand corner of the screen.
Press the Update button again to view the text page.
To reveal information
Press the Reveal button to reveal concealed information (quiz answers etc.).
Press the Reveal button again to conceal the information again.
Clock
Press the Sub button, whilst watching a TV program , to display the time.
Fastext
At the bottom of the teletext screen is a row of subject headings in red, green yellow and blue.
The remote control has a row of coloured buttons corresponding to the row of coloured subjects on the screen. Pressing one of the coloured buttons will take you directly to the page corresponding to the subject heading.
Connecting external equipment
You can connect a wide range of audio and video equipment to your TV.
Headphones
The headphones must have an impedance of between 8 and 32 ohms and have a 3.5 mm stereo jack plug.
Plug the headphone jack into the headphone socket of the TV.
Connecting Video Recorder, DVD Player, Decoder.
Via SCART
Make sure the TV and video recorder are both switched off.
Plug one end of the SCART lead (not supplied) into the back of the video recorder and the other end into the SCART socket on the back of the TV.
Switch on the video recorder and the TV.
Press the AV/TV button on the remote control to select AV1.
Please note:
You can connect a RGB external equipment
via Scart 1. It is necessary to use full Scart cable for this purpose.
Select the RGB outputs of the external device by using its menu.
You can also play NTSC scart via.
S-Video Player
If you have an
Press the AV/TV button two times to select AV1
Via PHONO lead
Make sure the TV and video recorder are both switched off.
Plug one end of the PHONO lead into the video and audio out sockets on the back of the video recorder and plug the other end into the video and audio in sockets of the TV.