CONNECTIONS
CONNECTING A
Make sure you connect the component video cable and audio cable from the other equipment
（COMPONENT OUT and AUDIO OUT）to the unit COMPONENT IN.
NOTE
When connecting a DVD player to the television, the picture resolution is solely dependent upon
the resolution supported by the DVD player attached. DVD player resolutions vary from 480i to 1080i.
and this television can support DVD players up to
amaximum resolution of 1080i.
* May require a subscription for receiving HD channels, check with your cable/satellite service provider for details.
To COMPONENT
VIDEO OUT jacks
To COMPONENT AUDIO
OUT jacks
COMPONENT IN
To COMPONENT
VIDEO IN jacks
To COMPONENT AUDIO IN jacks
CONNECTING A HIGH-DEFINITION (HD) SOURCE USING HDMI CONNECTION
HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for use with DVD players, DTV,
(DVI) in one specification. HDCP is used to protect digital content transmitted and received by
HDMI has the capability to support standard, enhanced or
Connect the HDMI cable (not included) as shown:
Make sure you connect the cable from the source equipment ( HDMI OUT ) to this unit ( HDMI IN ).
HDMI CABLE
(NOT INCLUDED)
To HDMI
IN jackTo HDMI
OUT jack
8