Polycom 60PP9753, 55PP9753 manual Setting the Clock-Auto Clock Mode, Auto Clock Channel

After following steps 1-4 above, press the Cursor Down button to select Auto Clock Channel.

Press the Cursor Right button to enter the channel list. Select your local PBS channel by using the Cursor Up or Down buttons to scroll through the channel list or inputing the the channel using the number buttons.

Press the Menu button on the remote control to remove the on-screen menu from the TV screen.

Press the Cursor Down button to select Auto Clock Mode. Then Press Cursor Right Button to Select “Automatic” or “Manual.” Select Automatic to have the TV acquire the time from a the TV signal. Choose “Manual” to set the time yourself.

Press the Menu button on the remote control to display the on-screen menu.

Setting the Clock—Auto Clock Mode

G

There are several features which require the TV clock to be set. You can either set the clock manually or have the TV acquire the time from the appropriate TV channel.

1

2 Press the Cursor Down button to high- light “Settings.”

3 Press the Cursor Right button repeated- ly to select the “Clock” menu.

4

TV

Settings

Demo

Install

Picture Sound Features Channels

3

TV

General Clock

Settings

Demo

Install

Clock

Settings

Auto clock mode

Auto clock channel

Time

Day

Time zone

If you choose to set the time Automatically you will need to set the “AutoClock Channel” by continuing with steps 5-8 below. If you select manual you will need to make the cor- rect settings by continuing on page 68.

Auto Clock Channel

5

6

7

8 Next Set the Time Zone and Daylight Savings Time. See page 69 for instruc- tions.

6 4

6

2 1

4 7

5

6 6

Daylight	saving
Settings		Clock	Automatic Manual
Auto clock mode
Auto clock channel
		Time
		Day
Time zone
Daylight	saving
Settings		Clock
				---
Auto clock mode				34
Auto clock channel				35
		Time		36
		Day		37
Time zone				38
Daylight		saving		---

HELPFUL HINT

When the clock is set to “automatic” there will be a several second delay when the TV is turned on and off. During this delay the blue LED will blink. This is normal.

67