| i. | AUTO ADJUST – This feature automatically adjusts the |
|
| picture syncing in with the signal of the PC. |
| ii. | HORIZONTAL POSITION – This feature adjusts the to |
|
| the left or right position of the PC picture. |
| iii. | VERTICAL POSITION – This feature adjusts the up or |
|
| down position of the PC picture. |
| iv. | CLOCK – This tunes in large increments the picture |
|
| quality of the PC picture. |
| v. | PHASE – This tunes in small increments the picture |
|
| quality of the PC. |
| vi. | RESET – This resets the settings of PC settings. |
IV. | COLOR TEMPERATURE – This feature adjusts the color temperature | |
| of the TV, giving warm, normal, cool, (warm being more red, cool being | |
| more blue and normal being neutral color). | |
V.ADVANCE PICTURE SETTINGS
i.DYNAMIC CONTRAST – This feature allows the TV to automatically adjust the contrast of the TV depending on the picture you are viewing.
ii.FILM MODE – This feature is 24p that syncs with DVD movies, and should be enabled when viewing DVD video to allow smoother frame rate.
iii.NOISE REDUCTION – This feature reduces general pixilation by blurring them.
iv.MPEG NOISE REDUCTION – This feature reduces DVD video pixilation by blurring them.
Please Note:
∙The OSD shows a button called ENTER (labeled ENTER:Press to Execute). The ENTER button refers to the ↵ button on the remote control.
∙If you use POWER SAVING as your picture mode, the screen’s color, and brightness will be significantly reduced.
-28 -
www.SCEPTRE.com
SCEPTRE X405 HDTV User Manual