Problems | Solutions |
TV’S UNIVERSAL | This television follows SONY’s universal remote code. To find |
REMOTE CODE | the actual code you must read through your own universal |
| remote’s guide book. |
TV CHANNELS ARE | Check your auto lock function’s settings inside the OSD. You |
BLOCKED | may have locked up some channels but forgot about them. |
| Refer to page 32 for more instructions. |
UNIVERSAL REMOTE | This TV follows SONY’s universal remote code. Please check |
CODE | your hand book for SONY’s codes then apply them. |
THE TV TURNS ON | This TV is a High Definition liquid crystal display panel TV. It |
OR OFF SLOWLY | requires a few more seconds than normal TVs to power up |
AND THE SCREEN | and show the picture. |
SHOWS UP SLOWLY |
|
NO SOUND ON PC | Make sure you have a 3.5 mm |
| your pc’s sound output to the TV’s VGA STEREO INPUT. |
HDCP VIDEO SAYS | Reboot your HDCP video device but turning them off and |
NO HDCP SUPPORT | unplugging the power cord. Wait up to 8 minutes to plug the |
| power back in to see if it works or not. |
| Make sure you have a 3.5 mm |
HDCP VIDEO HAS NO | your HDCP video device’s sound output to the TV’s VGA |
AUDIO | STEREO INPUT. If your HDCP video device uses RCA |
| AUDIO jacks, you’ll need to obtain a RCA audio converted into |
| 3.5 mm |
CANNOT GET | Make sure the TV is recognized as plug and play monitor. Try |
1920X1080 ON PC | updating your video card’s drivers as well. If that does not |
VGA | help, most likely you’ll need to upgrade your video card to a |
| newer one. |
PICTURE IS | This might be from interference from large electrical |
DISTORTED OR HAS | appliances, cars, motorcycles, or fluorescent lights. If the TV |
ABNORMAL SOUND | is close to the wall, try moving the TV to another room in your |
| house to see if the problem still occurs. |
| If you’re using HDMI or a TV digital channel make sure you |
| use the ASPECT button to switch to 16:9 format. If you are |
| using VGA, use the AUTO ADJUST function to adjust to the |
PICTURE DOES NOT | screen. Please Note : If you are using regular analog TV, AV, |
or component in 480i resolution, use the ASPECT button to | |
COVER THE ENTIRE | switch to 16:9 in order to fill up the screen. Please Note : This |
SCREEN | note this feature will distort the picture. |
| For best image quality, view HD widescreen programs where |
| possible. If HD content is not available view “Standard |
PICTURE QUALITY IS | Definition” from a digital source. Standard, analog TV will |
always be noticeable inferior to HD because your TV has | |
HORRIBLE!! | video that is many times better than old TV’s and so you can |
| |
| see interference and deficiencies you did not KNOW you had. |
PICTURE HAS | Your TV is manufactured using an extremely high level of |
PIXELS THAT ARE | precision technology, however, sometimes some pixels of your |
ALWAYS | TV may not display. Pixels defects within industry |
DISPLAYING THE | specifications are inherent to this type of product and do not |
SAME COLOR | constitute a defective product. |
I CANNOT CHANGE | Your TV syncs time automatically according to your local TV |
THE TIME MANUALLY | channel. This function only works while the TV’s tuner is |
| connected to an ANTENNA. |
| - 48 - |
www.SCEPTRE.com
SCEPTRE