Attaching or Removing the Stand
1.Please connect the stand to the TV by aligning the stand and the TV itself.
2.Secure the connection with a screw driver and the 4 screws included in the accessory box. You can screw them in from the bottom section of the TV. DO NOT over tighten the screws when installing the stand; otherwise the stand’s threading will become stripped.
3.Similarly, to remove the stand, simply remove the 4 screws at the bottom section of the TV and pull out the stand. The 4 screws in the package are for securing the TV stand only. If you are mounting the TV please consult a qualified installer for further instructions on bracket support and wall support.
- 8 -
www.SCEPTRE.com
SCEPTRE X320 HDTV User Manual