Sceptre Technologies X270 user manual

The following descriptions are for connections from left to right.

A.AC POWER IN – This connection provides the LCD TV with power.

B.USB – USB connects to USB flash drives for playing music and picture. The USB port is also used for updating the TV’s firmware.

C.HDMI1 – HDMI connects to devices that use HDMI cable, such as Blu-ray or HD DVD player, or HD cable / satellite set-top box. This connection port receives pure digital audio and high definition signal through one single cable. This port also can accept a HDCP video device for video.

D.HDMI2 – Refer to HDMI1.

E.VGA STEREO INPUT - This connection port is for people who want to provide audio to the TV when using a PC or a DVI video device. The sources use 3.5mm mini-jack audio cable.

F.VGA - This connection port connects to a PC for video using VGA cable. Be sure to connect your audio cable to the VGA Stereo input if you want sound out of VGA video source.

G.YPBPR (video) – This connection port is for DVD players or satellite / cable set-top boxes that use component cables. From left to right, connect green, blue, and red for video.

H.YPBPR (audio) – This connection port is for DVD players or satellite / cable set-top boxes that use component cables. From left to right connect white for left channel audio, and red for right channel audio.

I.AUDIO OUT – This connection port is used for sending out analog audio signals with red and white RCA type connectors.

J.AV/SVIDEO (audio) – This connection port is used for receiving audio signals for SVIDEO or AV port.

K.TV – This connection is for digital or analog cable without the cable box or over-the- airwave antennas. The tuner is a hybrid tuner that tunes to both analog and digital channels. This connection uses coaxial RF cable. For over-the airwave digital stations please check http://www.antennaweb.org.

L.AV – AV connects to devices that use composite video cables such as VCR or DVD player or Wii™. Connect the yellow for video and t he red / white for audio.

M.S-VIDEO– S-VIDEO connects to devices such as SVCR or camcorder or video game consoles. The S-VIDEO connection shares audio red & white connectors with AV. Please connect the video portion with the S-Video connector. Do NOT connect both video connectors.

N.SPDIF OUT - This connection port is used for sending out digital audio signals to digital surround sound receivers. The orange (COAX SPDIF OUT) connector sends out either bit-stream or PCM digital sound signal to a home theater receiver with digital coax input.

O.HDMI3 – Refer to HDMI1.

P.HEADPHONE – This connection is for headphones to be attached to the TV.

Please Note:

∙USB flash drive music will not output with SPDIF digital audio out. USB flash drive music will only output with analog audio out under label I.

- 12 -

www.SCEPTRE.com

SCEPTRE X270 HDTV User Manual