Sceptre Technologies E420BV-F120 Installing Batteries to the Remote Control, Please Note

right channel audio.

7.S-Video– S-Video connects to devices that use S-Video cables such as VCR or DVD player or Wii™. Connect the black for video and the red / white for audio. This connection shares audio red / white jacks with YPbPr.

8.Analog Audio Out – This connection is for connecting to analog audio receivers.

9.USB – USB connects to USB flash drives for playing music and picture. The USB port is also used for updating the TV’s firmware.

10.SPDIF - This connection port is used for sending out digital audio signals to digital surround sound receivers. The orange (COAX SPDIF OUT) connector sends out either bit-stream or PCM digital sound signal to a home theater receiver with digital coax input.

11.HEADPHONE – This connection is for headphones to be attached to the TV.

12.HDMI3-5 – Please refer to HDMI1-2’s description.

Please Note:

•This TV features a power saving function which will turn off the TV automatically after 10 minutes of idling on a connection with no signal. This feature is present on all connection.

Installing Batteries to the Remote Control

Please insert two AAA batteries into the remote control. Make sure that you match the (+) and (-) symbols on the batteries with the (+) and (-) symbols inside the battery compartment. Afterwards, re-attach the battery cover.

Please note:

•Only use AAA batteries.

•Do not mix new and old batteries. This may result in cracking or leakage that may pose a fire risk or lead to personal injury.

•Inserting the batteries incorrectly may also result in cracking or leakage that may pose a fire risk or lead to personal injury.

•Dispose the batteries in accordance with local laws and regulations.

•Keep the batteries away from children and pets.

•If the remote control is not used for a long time, remove the batteries.

•Keep the remote control away from moisture, sunlight, and high temperatures.

- 13 -

www.SCEPTRE.com

SCEPTRE E420BV-F120 HDTV User Manual