Sceptre Technologies LED HDTV, E246BV-FHD, E236BV-FHD user manual Troubleshooting

Page 46

Troubleshooting

The following table contains the common problems and the solutions to these problems. Please check this list before you contact the technicians.

Problems

Solutions

 

Connect power cord correctly.

NO PICTURE

Turn on power.

Connect video cable correctly.

 

Select the input signal source with proper cable connection with

 

the source button.

ABNORMAL

Match the colors on the cables to the ports off the back of the

COLORS

television. I.E. red cable to red colored port.

PICTURE IS TOO

Adjust your contrast, brightness and lamp settings from the

DARK

OSD Menu. For adjust controls, refer to page 27.

AUDIO ONLY NO

Make sure you have connected both your video and audio

PICTURE

cables.

 

The TV’s tuner signal must not be lower than 65 %.

PICTURE ONLY NO

Make sure the audio cable is connected.

AUDIO

Readjust your volume via the remote control.

 

The TV’s tuner signal must not be lower than 65 %.

 

Turn off the TV, unplug it from the socket. Remove the

REMOTE CONTROL

batteries out of the remote for 30 minutes. Press the remote

buttons and the power button randomly for a good 2 seconds,

DOES NOT WORK

and then reinstall the batteries. Try the remote to see if it

 

works. For battery removal instructions, refer to page 13.

 

The TV’s remote sensor is also housed in the same place as

 

the power indicator light. Please make sure there is line of sight

 

from the remote control’s front sensor to the remote sensor of

 

the TV.

CANNOT RECEIVE

The TV’s tuner signal must not be lower than 65 %. Change

SUFFICIENT

the direction of your antenna and rescan your channels. If you

CHANNELS

have cable call up your cable company and ask about signal

THROUGH THE

strength of your local cable.

ATSC/NTSC TUNER

 

 

Please adjust your picture setup and make sure the saturation

NO COLOR

and the RGB are not turned all the way down. For adjustment

 

controls refer to page 27.

 

The TV’s tuner signal must not be lower than 65 %. Check your

 

signal.

WEAK SIGNAL OR

The TV’s tuner signal must not be lower than 65 %. Change

NO PROGRAM

the direction of your antenna and rescan your channels. If you

SYMBOL ON

have cable call up your cable company and ask about signal

SCREEN

strength of your local cable.

TV’S UNIVERSAL

This television follows SONY’s universal remote code. To

REMOTE CODE

find the actual code you must read through your own

 

universal remote’s guide book.

- 46 -

www.SCEPTRE.com

SCEPTRE E246BV-FHD HDTV User Manual

Image 46
Contents Dear Sceptre Customer Important Information Safety Instructions Safety Instructions Page Television Antenna Connection Protection External Television Antenna GroundingInstallation Package ContentsOpening the Package Attaching or Removing the Stand Table of Contents Front View Identifying Front and Rear PanelRear View Mounting Pattern Top side Control Buttons Rear View Connections Installing Batteries to the Remote Control Please NoteSceptre TV Remote Control Page Connection Suggestions If You Have Digital Cable without Cable Box or Antenna…Connecting DVD Player with Component YPbPr… Connecting Wii with Composite… Connecting Cable or Satellite boxes with HDMI… Connecting to a PC with VGA and 3.5 mm minijack … Connecting a Digital Audio Receiver with Coax SPDIF… Switching Sources Starting up the Hdtv Ready to Watch Some TV?If You’ve Connected Antenna or Cable to the TV… Page OSD On Screen Display Controls Via Remote ControlVia TV Side Panel Buttons OSD On Screen Display Options PicturePicture Settings II. Screen SettingsIII. PC Settings Advance Picture Settings Sound Settings SoundOther Settings Channel III. Channel Setting Parental Setup III. Clock Others USB Connection Explained Detailed ExplanationsBrowsing Technical Limitation Please NoteGeneral Operation Closed Captioning digital and analog ExplainedRating Explained Ustv Rating TV-Y Ustv For All ChildrenTV-14 Ustv Parents Strongly Cautioned TV-G Ustv General AudienceTV-PG Ustv Parental Guidance Suggested TV-MA Ustv Mature Audience OnlyAspect Ratio Explained FullZoom Waterglass panoramaShortcuts to Browsing Channels To ADD to the Favorite ListHow do I clean the TV ? Cleaning the bezel and remote controlTroubleshooting Universal TV Channels areBlocked Remote CodeContent Users Switching aVolume Channel orCall Us If You Need Help Specification Illustration4NTSC/ATSC Limited Product Warranty Warranty Service Disclaimer, Trademarks, & Copyright Information FCC Compliance Statement European Notice

E236BV-FHD, LED HDTV, E246BV-FHD specifications

Sceptre Technologies has long been recognized for delivering quality displays that cater to diverse consumer needs, and their E246BV-FHD and E236BV-FHD models are prime examples of this commitment. Both models embody an ideal combination of affordability, performance, and necessary features for an engaging viewing experience.

The Sceptre E246BV-FHD is a 24-inch LED HDTV that provides vivid imagery and clarity, making it an excellent choice for bedrooms, kitchens, or small living spaces. Featuring a full HD resolution of 1920x1080 pixels, this television ensures that viewers can enjoy their favorite shows, movies, and gaming experiences in exceptional detail. The LED backlighting technology enhances picture quality by delivering brighter colors and deeper blacks, resulting in a vibrant viewing experience.

One of the standout features of the E246BV-FHD is its multiple connectivity options. It comes equipped with HDMI ports, allowing users to connect multiple devices, such as gaming consoles, Blu-ray players, and even streaming devices. Additionally, the inclusion of a USB port enables easy playback of photos, music, and videos directly from external storage devices.

The E236BV-FHD, a slightly smaller variant, boasts many of the same remarkable features, but in a 23-inch form factor. This makes it even more versatile for situations where space is limited. Like its larger counterpart, the E236BV-FHD also supports full HD resolution and employs LED technology to enhance viewer experience with exceptional brightness and contrast.

From a design perspective, both models feature a sleek, contemporary appearance with slim bezels that maximize screen space, making them aesthetically appealing. The stands provide stability while allowing for easy adjustment of viewing angles.

Additionally, these televisions have built-in speakers that deliver clear sound, although those seeking a more immersive audio experience may want to consider external speakers or soundbars.

Energy efficiency is another significant characteristic of these models, as they are designed to consume less power while providing excellent performance. This eco-friendly aspect not only reduces electricity bills but also promotes responsible usage.

Overall, the Sceptre E246BV-FHD and E236BV-FHD represent a combination of modern technology, versatility, and affordability, making them excellent choices for anyone looking to enhance their home entertainment experience without breaking the bank. Whether for casual viewing or as a secondary screen, these models provide impressive performance and functionality.