Sceptre Technologies E195 user manual Rear View Connections

Rear View Connections

1.DC – This connection connects to an AC adapter for powering the TV.

2.USB – USB connects to USB flash drives for playing music and picture. The

USB port is also used for updating the TV’s firmware.

3.HDMI1 – HDMI connects to devices that use HDMI cable, such as Blu-ray or HD DVD player, or HD cable / satellite set-top box. This connection port receives pure digital audio and high definition signal through one single cable. This port also can accept a HDCP video device for video.

4.HDM2 – HDMI connects to devices that use HDMI cable, such as Blu-ray or HD DVD player, or HD cable / satellite set-top box. This connection port receives pure digital audio and high definition signal through one single cable. This port also can accept a HDCP video device for video.

5.VGA - This connection port connects to a PC for video using VGA cable. Be sure to connect your audio cable to the VGA Stereo input if you want sound out of VGA video source.

6.Audio In - This connection port is for people who want to provide audio to the TV when using a PC or a DVI video device. The sources use 3.5mm mini-jack audio cable.

7.SPDIF - This connection port is used for sending out digital audio signals to digital surround sound receivers. The orange (COAX SPDIF OUT) connector sends out either bit-stream or PCM digital sound signal to a home theater receiver with digital coax input.

8.HEADPHONE – This connection is for headphones to be attached to the TV.

9.YPbPr – This connection port is for DVD players or satellite / cable set-top

- 12 -

www.SCEPTRE.com

SCEPTRE E195 HDTV User Manual