Sceptre Technologies E Series user manual General Setup

1.General Setup Page

a.Press the D.SETUP button and then press the ◄/► to display the system setup menu page when you are in DVD mode.

b.Press the ▲/▼ button to select options in the menu.

c.Press the ► button to enter menus or options and use the ▲/▼ button to select suboptions.

d.Press the ENTER button to confirm.

e.Press the D.SETUP to exit the DVD setup menu.

1)TV Display – This option should be set to 4:3 Pan Scan,4:3 Letter Box or Wide.

2)OSD Language – This option changes the language of the on screen display.

3)Screen Saver-If enabled, after several seconds of inactivity the player will show the screen saver to prevent damage to your device.

4)Last Memorey- you can store the point where playback stopped last. Select this option if you want to memorize.

2.Audio Setup Page

a.Press the D.SETUP button and then press the ◄/► to display the language setup menu page when you are in DVD mode.

b.Press the ▲/▼ button to select options in the menu.

c.Press the ► button to enter menus or options and use the ▲/▼ button to select suboptions.

d.Press the ENTER button to confirm.

e.Press the D.SETUP to exit the DVD setup menu.

1)Speaker Setup – This option can to set downmix mode. Downmix- the conversion of audio can be set in LT / RT or Stereo. When connected to a mono speaker system, use the RT / LT. When connected to a stereo or surround system, use the Stereo.

- 40 -

www.SCEPTRE.com

SCEPTRE E Series LED HDTV User Manual