ANALOG MENU SCREENS
1.Plug in the power cord and switch on power switch . The power indicator will light up. If TV is in stand by mode. Then Press"¡¡" Key. The picture will display in few minutes.
MENU BUTTON
1.Press menu button to display menu, and press left/right arrow key to select sub menu.
PICTURE 
SOUND 
INSTALLATION 
TIMER 
PREFERENCE 
PARENTAL CONTROL
2.After entering an item, you can select the desired adjusting item by the up/down arrow key and adjust It by the left/right arrow key buttons.
Picture menu
Enter picture menu, you can select Picture
Preset, Contrast, Brightness, Colour, Sharpness, and Noise Reduction. items by pressing up/down arrow key.
Picture Preset
Press the left/right arrow key to change the Picture Preset. Such as SOFT, NORMAL, BRIGHT, Or Personal. Choose the setting that is best for your viewing environment.
Contrast
Press the left/right arrow key to increase /Decrease the contrast of the picture.
Brightness
Press the left/right arrow key to lighten/darken the picture.
Colour (not available on PC)
Press the left/right arrow key Adjusts the richness of the color.
Sharpness
Press the button to sharpen or soften the picture. (Not available on PC and HDMI input .)
Tint
Press the left/right arrow key to adjust tint. (Available for NTSC .)
Noise reduction
Press the button to select off, low, mid, high to adjusts the dynamic noise reduction level of image.(Not available on PC and HDMI input .)
Color Temp
Press left/right arrow key to change picture color temperature such as neutral, warm and cool .