PICTURE IN PICTURE (PIP) OPERATION
Picture In Picture (PIP) Operation
PIP Operation with a VCR and Cable Box
This television includes a Picture In Picture (PIP) feature. A second video source (VCR, Camcorder, etc.) is required to provide a second picture.
Connect your television to a VCR and Cable Box, as shown.
VCR | CABLE BOX |
TERMINALS ON BACK OF TV
ANT OUTPUT |
AUDIO | L | VIDEO |
|
| VIDEO OUT | ||||
R |
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
TO AUDIO
ANT | AMP | ANT INPUT |
| ||
| 2 | L |
| AUDIO OUT | |
| INPUT | |
| R | |
| 1 | |
|
| |
|
|
Incoming
Cable
Cable Splitter (Not Supplied)
CABLES NOT SUPPLIED
Note: The remote control must be programmed with supplied codes to operate the VCR and Cable Box. See Programming the Remote Control in the Remote Control Quick Reference Guide.
Procedure Turn the VCR OFF and tune TV to channel 3.
Press the PIP button on the remote control to display the PIP frame.
Note: The PIP picture is the same as the main picture, initially. To view a different picture in the PIP frame:
•Press the TV/VIDEO button on the remote control to select the video PIP source.
•Verify the CABLE BOX and VCR are ON and the VCR tuned to channel 3.
•Choose channels for the PIP frame by pressing the CABLE button on the remote control and using the numeric keypad or CH up/down buttons.
•Choose channels for the Main Picture by pressing the TV button on the remote control and using the numeric keypad or CH up/down buttons.
SWAP Button
The SWAP button switches the PIP and Main Picture source. Press the RECALL button for on screen PIP and Main Picture source status.
7