Operating Additional Equipment
| Press the OK button to search | |
OK | for the Teletext preview page. | |
| Use the green button to scroll | |
| to the next page and the red | |
| button to scroll back. | |
| Use the up / down arrow | |
OK | buttons to highlight the start | |
time. | ||
|
Entering Timer Information “By Hand”:
• Press the button | . |
• Call up the video menu using the MENU | |
button. |
|
• Select the line “Timer record”. | |
• Confirm with OK. |
|
• Select the line “Manual”. | |
• Confirm with OK. |
|
• In the preview, select the channel to be | |
recorded. |
|
• Confirm with OK. |
|
• Check the timer information, such as AV |
OK
Press the OK button and the timer information is displayed for you to check.
This can be altered, e.g. select AV connection 1 ...
transfer the information to the
| connection, VPS yes or no, date. |
• Enter the start and end times. | |
• | Confirm with OK. The timer information is |
| saved. |
• | Exit the menu using the END button. |
OK | timer using the OK button. |
|
A maximum of 4 timer recordings can be programmed.
Note
Ensure that the date and time on the TV set have been set correctly.
The start and end times of a programme may change, therefore you should use the VPS times by selecting “VPS yes” in the “Timer Informa- tion” menu.
The set should never be switched off at the On/ Off switch if timer recordings have been programmed.
If you switch the TV set to Standby mode with the remote control, in the case of VPS recordings it switches over automatically about 1 hour before programme start to the appropriate programme and into Timer mode, i.e. the green indicator light on the front of the set is lit. Switch the videorecorder to Standby too, i.e. only the time is displayed.
Changing or Cancelling Timer
•Press the button .
•Call up the video menu using the MENU button.
•Select the line “Change timer”.
•Confirm with OK.
•Select the timer to be changed.
•Confirm with OK.
•Make the corrections.
•Confirm with OK. The new timer informa-
tion is saved.
To cancel timer information, select the line “Cancel timer” in the video menu.
Select the timer to be cancelled and confirm with OK in order to cancel it.
24
LCD_SAT_31715022_GB | 24 | 10.08.2004, 15:44 Uhr |