HANNspree ST25-10A1 user manual Switching Source Signals, Adjusting the Volume

Switching Source Signals

Press the SOURCE button to select different source signals.

CH, AV1, and AV2 appear on the top right corner of the screen in that order.

Note

The TV supports S-Video input in addition to normal video and audio signals. The TV detects the signal type automatically and gives priority to S-video when two signals are detected at the same time.

Source

SOURCE MENU

CH 33

Adjusting the Volume

1Press the VOL UP button to increase the volume.

2Press the VOL DOWN button to decrease the volume.

3Press the MUTE button. The word “MUTE” appears on the top right corner of the screen and sound is turned off.

4Press the MUTE button again to restore the original volume.

Volume up Volume down

SOURCE MENU

MUTE

29