HANNspree DT0B-10A1 manual Switching Source Signals, Adjusting the Volume

Switching Source Signals

Press the SOURCE button on the	Current source setting
remote control or the SOURCE
button on the control panel to
select the incoming source sig-
nal.	C H 4 0
The current source setting CH xx
appears on the top left corner of
the screen, AV1 or AV2 appears		AV 1
on the bottom right corner of the	MENU	SOURCE
screen.	CH	CH

Note:	Source TV/AV
The TV supports S-Video input in

addition to normal video and audio signals. The TV detects the signal type automatically and gives priority to S-video when two signals are detected

at the same time. This auto detection function is only available for AV2.
Adjusting the Volume
Press the VOL UP button to
increase the volume. Press the
VOL DOWN button to decrease
the volume. The volume level is	Mute
displayed on the TV.
Press the MUTE button on the
remote control to turn the sound
off. The word “Mute” appears on	MENU	SOURCE
the top left corner of the screen	CH	CH
and sound is temporarily turned
off.	Volume upVolume down
Press the MUTE button on the

remote contorl or press the VOL UP button or VOL DOWN button to restore the original volume.

27