13
Troubleshooting
Situation |
| Solution | |
|
| ||
| • Connect the power cord properly. | ||
| • Press the POWER button on the control | ||
|
| panel or remote control. | |
| • Press the SOURCE button to cycle through | ||
No picture and sound. |
| connected video sources. | |
• Press the CH UP or CH DOWN button to | |||
| |||
|
| switch to other TV stations. | |
| • Check the TV/CATV OSD settings. See | ||
|
| “TV/CATV” on page 42. | |
| • Make sure all cables are connected properly. | ||
|
| ||
No picture, or poor picture, sound is | • Check the antenna and cable connections. | ||
• Adjust the brightness in the OSD menus. See | |||
OK. | |||
| “Brightness” on page 30. | ||
|
| ||
|
| ||
Picture is not in color. | • Adjust the saturation in the OSD menus. See | ||
| “Saturation” on page 34. | ||
|
| ||
|
|
| |
| • | Press the VOL UP button on the control | |
Picture is OK, no sound. |
| panel or remote control. | |
• Make sure the MTS option is set to Main or | |||
| |||
|
| Dual. See “MTS” on page 43. | |
|
| ||
One of the speakers has no sound. | • Adjust the balance in the OSD menus. See | ||
| “Balance” on page 40. | ||
|
| ||
|
| ||
Can’t receive some TV channels using | • Try the Auto Program function in the OSD “TV | ||
| Setting” menu. See “Auto Program” on | ||
cable TV. |
| ||
| page 44. | ||
|
| ||
|
|
| |
Want to reset TV settings. | • | Use the Reset function in the OSD menu. | |
|
| ||
| • If OSD items are colored light blue, the sys- | ||
Cannot operate menus. | tem is in a state such that those settings are | |
not available. For example, video setting is | ||
| ||
| available in TV mode. |
No image but have sound.
•Make sure the video signal cable is con- nected properly.
54 
