HANNspree HANNSrobby user manual Using the TV

9

Using the TV

Using the Remote Control

For best results, use the remote control within a distance of 16 feet

(5 meters) from the front of the TV. Do not exceed an angle of 30 degrees when pointing at the TV.

Notes

•The operational distance may be shortened when the signal sensor is directly exposed to strong light.

•Aim the transmitter on the remote control at the signal sensor and ensure that there are no obstacles between them.

Turning the TV On and Off

1Press power on the remote control or control panel to turn on the TV.

2Press power again; the TV is in off mode.

Selecting Channels

Press channel up or channel down on the control panel to select the channel or enter the specific channel number by pressing the number buttons on the remote control.

Switching Source Signals

Press source to select the incoming source signal.

The current source setting (TV/CATV, AV or S-Video) appears on the upper left corner of the screen.

Adjusting the Volume

Press volume up to increase the volume. Press volume down to decrease the volume. The volume level is displayed on the screen.

30